Product category:
Compressors and Air Treatment
News Release from: Beko Technologies | Subject: Bekomat 13 CO PN 40
Edited by the Engineeringtalk Editorial
Team on 03 July 2007
Condensate drains tolerate oil-free
condensates
The Bekomat 13 CO PN 40 has a 50 micron hard coating, which gives a ceramic structure to the surface of its aluminium housing.
Oil-free condensates and condensates from gas compressors are normally highly aggressive However, they cannot attack the Bekomat 13 CO PN 40
This article was originally published on Engineeringtalk on 11 Aug 2000 at 8.00am (UK)
Related stories
Adsorption dryers cut compressed air costs
Beko's new Drypoint AC cold-regenerated adsorption dryers help prevent corrosion, rejects or damage on the production line with reduced treatment costs and increased reliability.
The excellent corrosion resistance of the device is due to a 50 micron hard coating, which gives a ceramic structure to the surface of its aluminium housing.
The Bekomat 13 CO PN 40 condensate drain is designed for application with compressors up to 30 m/min capacity (temperate climate) and an operating pressure of 0.8 - 40bar.
The 40bar version rounds off the Bekomat 13 programme together with the 16 and 25bar devices.
The accessories of the Bekomat product line include mounting brackets, easily retrofittable heating, insulating shells and trace heating systems in areas where frost is likely to occur.
Beko's wide range ensures that there is just the right type of Bekomat condensate drain available for each application and each compressor category. Request a free brochure from Beko Technologies ...
• Beko Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
