Product category:
Compressors and Air Treatment
News Release from: Beko Technologies | Subject: Bekomat 31/32 condensate drains
Edited by the Engineeringtalk Editorial
Team on 03 September 2007
Condensate drains offer simplified
design
No tools are required to connect and disconnect either module - a simple hand movement will do.
The new Bekomat 31/32 condensate drains made by Beko Technologies now consist of only two element groups Complete maintenance can be carried out with a single movement
This article was originally published on Engineeringtalk on 11 Aug 2000 at 8.00am (UK)
Related stories
Adsorption dryers cut compressed air costs
Beko's new Drypoint AC cold-regenerated adsorption dryers help prevent corrosion, rejects or damage on the production line with reduced treatment costs and increased reliability.
Air contamination remover in smaller size
Beko Technologies has just introduced a new version of its Bekosplit compressed air, condensate and emulsion splitting plant, which is ideal for smaller applications and installations.
The drains are subdivided into two modules: the service unit which combines all maintenance components and the electronic control and sensor unit, which only needs to be installed once.
Both units are coupled via a practical quick connector.
This concept allows the simple replacement of parts by replacement of the service unit, which was checked by the manufacturer.
No tools are required to connect and disconnect either module - a simple hand movement will do.
The ready-for-use service unit has already been pressure and function-tested in the factory.
During its mounting, no further electrical installation or fitting of seals and component parts is required.
This plug-and-play principle achieves maximum cost-effectiveness in a minimum of time for the maintenance of the Bekomat 31/32 devices.
In addition, the Bekomat 32 has an alarm function, a switchable potential-free fault message transmission and a remote control function.
More than one million electronically level and sensor-controlled condensate drains have already been installed throughout the world.
Bekomat 31/32 devices avoid unnecessary compressed-air losses during condensate drainage.
The condensate housing is made of noncorroding aluminium, ensuring operational reliability and durability. Request a free brochure from Beko Technologies ...
• Beko Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
