Product category:
Compressors and Air Treatment
News Release from: Brownell | Subject: NEPS1000
Edited by the Engineeringtalk Editorial
Team on 05 September 2006
Portable purge system banishes moisture
Nitrogen environment purge system creates dry internal environments for any equipment at risk of malfunction and long-term corrosion from the damp.
Brownell has introduced its NEPS1000 (nitrogen environment purge system), which creates dry internal environments for cameras, circuit boards, lasers, high voltage and electronic equipment, optical systems and other equipment at risk of malfunction and long-term corrosion from the damp It provides oxygen inhibiting with nitrogen gas protection
This article was originally published on Engineeringtalk on 18 May 2004 at 8.00am (UK)
Related stories
Purge improver shows advantage of dry gas
The NEPS1000 Advantage is a dry nitrogen and gas purge improver, which can be used with most dry gases including argon, helium and SF6.
Gas purging system simplifies humidity control
Brownell dry gas purging safeguards products ranging from electronics, switchgear and workstations to storage containers, underwater equipment and double glazing cavities.
Purging is used as part of the manufacture procedure to remove in built moisture within instruments and systems to prevent condensation and high humidity resulting in malfunction and poor reliability.
Using NEPS1000 provides users with purging process performance including dewpoint dryness in built moisture removal.
Standard purging processing often uses two ports to flow the gas through the instrument or system.
NEPS1000 provides the use with complete gas control and management while economising the use of dry gas and improving purging efficiency.
NEPS1000 is fully automatic and can be programmed to achieve the users required dryness without manual intervention.
NEPS1000 can also be used with dry air or other gases when a dry specific inhibiting environment is required.
Gas dryness can be tested with NEPS1000 before purging commences.
NEPS1000 is available in both laboratory and portable versions for field and remote applications.
NEPS1000 can also be used to pressure test an instrument or system to prove or establish a leak rate before purging. Request a free brochure from Brownell ...
• Brownell: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
