Product category:
Seals
News Release from: Trelleborg Sealing Solutions UK | Subject: MF and LF coated O-rings
Edited by the Engineeringtalk Editorial
Team on 16 July 2003
Coatings improve O-ring performance
Two new coatings provide performance, installation, environmental and cost benefits for O-rings, together with handling advantages in automated assembly processes.
Two new coatings provide performance, installation, environmental and cost benefits for O-rings, together with handling advantages in automated assembly processes Recognising the increasing use of common O-rings in automated assembly of products, particularly in the domestic appliance and automotive component sectors, Busak+Shamban material technicians have developed two new coatings, both with advanced characteristics, to address the problems associated with the use of elastomeric O-rings in automated assembly
This article was originally published on Engineeringtalk on 12 Mar 2001 at 8.00am (UK)
Related stories
Extended perfluoroelastomer range of seal options
Busak+Shamban Isolast Plus extends the perfluoroelastomer range of seal options and now includes an FDA compliant material.
New Generation of thermoplastic bearings
HiMod®, a new generation of thermoplastic bearings is providing OEM designers and production engineers with all the advantages of plastic engineering plus unsurpassed performance
MF coating, developed for use with traditional elastomer O-rings in static sealing applications, is a transparent PTFE-based coating which greatly reduces the friction so often encountered with dry sealing surfaces and thus helps to avoid the problem of seal-stick during automated assembly.
A further benefit, gained through the application of this high-tech micro coating, is the significant reduction in seal damage during the assembly process - a critical factor in a one-time installation of the seal, within a closed design envelope.
LF coating offers further reductions in friction making these coated O-rings suitable for use in dynamic applications, where increased friction forces are encountered.
Further reading
Go maintenance-free with Luytex Bearing Materials
Already well known among many industries, Luytex® engineered composite bearings are used in a wide range of general engineering applications
The O-Ring - economic and everlasting (almost!)
The O-Ring - economic - effective - efficient - everlasting (well, almost!)
Although LF coating offers the same benefits as MF coating in automated assembly, tests indicate that the resilience of the LF coating makes possible repeated re-installation of LF coated seals, with no resultant damage.
Furthermore, LF coating will continue to function long after installation, preventing premature failure of the seal in case dry running occurs.
Both MF and LF coatings negate the use of costly friction-reducing lubricants and the associated environmental contamination.
This, combined with the elimination of "assembly damaged seals" and consequential costs, makes the use of Busak+Shamban MF and LF coated O-rings a viable design and production proposition.
The coatings, which do not exhibit cracking when the O-ring is stretched, can be applied to almost any elastomer and being solvent-free are environmentally friendly and compliant with requirements relating to VDA232-101.
In particular, the coatings offer an expanded field of application for inexpensive elastomer seals and, additional to the characteristics previously described, provide quality assurance benefits.
Prior to the first application, the transparent layer glows purple under ultraviolet light.
In addition to this ultraviolet active layer offering speedy distinction between coated and uncoated seals of the same type and size, the feature provides manufacturers the opportunity to use detection equipment for checking seal installation.
• Trelleborg Sealing Solutions UK: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
