Product category:
Pneumatic Valves and Controls
News Release from: Camozzi Pneumatics | Subject: Series E solenoid valves
Edited by the Engineeringtalk Editorial
Team on 17 February 2000
Solenoid valves meet any application
Series E solenoid valves combines compact dimensions with outstanding flow rates to produce exceptional performance and versatility.
Camozzi's range of Series E solenoid valves combines compact dimensions with outstanding flow rates to produce exceptional performance and versatility in meeting the needs of today's design market The Series E is available in sizes of 10.5, 16, 19 and 27.5 mm and offers maximum flow rates of 280, 610, 1,000 and 2,500 litres per minute respectively
This article was originally published on Engineeringtalk on 20 Feb 2001 at 8.00am (UK)
Related stories
Profibus DP interface for solenoid valve banks
Camozzi has recently introduced into its extensive product range the Series CP Fieldbus Interface for solenoid valve banks, which conforms to the international Profibus standard EN50170
ISO/VDMA cylinder ranges extended
Camozzi has extended the Series 40-41 range of cylinders to include diameters 125mm, 160mm and 200mm to ISO/VDMA standards.
A large number of assembly combinations allow a flexible or customised solution for every application.
Valves are available with interchangeable connection plates, fitted with push-in cartridges or threaded ports.
The solenoid and pilot operated valves, which are 5-port, 2-position as standard, are available in both bistable and monostable functions.
It is also possible to supply 5-port, 3-position valves with centre-closed, centre-open and pressure-applied spool options.
The compact design and construction of the Series E makes the range particularly suitable for manifold assembly.
Manifold blocks of 2 to 12 positions are available as standard, both for body threaded and base mounted valves.
These manifold blocks can also be produced for larger numbers of valves, on request.
The manifold's design allows fixing to "top hat" DIN rail type EN50022.
Depending on the application, the manifold blocks can be supplied with threaded connection ports or push-in cartridges.
The latter makes piping particularly quick and simple, providing a compact assembly with limited dimensions.
Each manifold has a mounting feature for the electrical interface.
The exhaust ports are connected to a common channel within the extrusion, allowing air to be piped away and thereby reducing emissions into the control environment.
The Series E valve is also suited to integration into electronic systems due to its compact design and extensive range of accessories.
The valve's electrical interface device, equipped with a multi-pole connector, allows incoming electrical signals to be connected to one point and then distributed to the coils.
This modular system enables the supply group to be customised to suit the application, creating integrated mono and bistable valve assemblies.
• Camozzi Pneumatics: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
