Product category:
Materials and components
News Release from: Chomerics Europe | Subject: Clip-Shield EMI shielding gaskets
Edited by the Engineeringtalk Editorial
Team on 22 May 2001
Clip-on EMI shielding gaskets for
tougher jobs
The new Clip-Shield range of clip-on EMI shielding gaskets from Chomerics have been designed for enclosure applications requiring both high levels of shielding and resistance to outdoor environments
The new Clip-Shield range of clip-on EMI shielding gaskets from Chomerics have been designed for enclosure applications requiring both high levels of EMI shielding and resistance to outdoor environments Providing a secure mechanical attachment to enclosure doors or panels, Clip-Shield consists of a Chomerics Cho-Seal conductive elastomer, bonded to a flexible PVC/TPE-coated aluminium clip
This article was originally published on Engineeringtalk on 23 Mar 2001 at 8.00am (UK)
Related stories
Double-sided tape simplifies PCB assembly
The latest thermally conductive adhesive tape from Chomerics can significantly simplify PCB assembly by eliminating thermal grease and mechanical fasteners when bonding heat sinks to microprocessors
A choice of several Cho-Seal materials is available, all of which can be co-extruded with a non-conductive silicone for optimum environmental protection.
The shielding effectiveness of Clip-Shield ranges from 55 to 120dB over the frequency range 200MHz to 10GHz, depending on the Cho-Seal material specified.
Designed for easy manual installation, Clip-Shield can be attached to curved mounting surfaces with a corner radius down to 51mm, and it is also available with 90ø spliced corners if required.
Clips can be specified in different sizes to accommodate panel thicknesses from 1.52 to 12.7mm, and conductive elastomer extrusion widths are available up to 19.05mm.
• Chomerics Europe: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
