Product category:
Process Hardware (Pipes, Nozzles, Heaters, etc)
News Release from: Circor Instrumentation | Subject: Hoke HQC quick couplers
Edited by the Engineeringtalk Editorial
Team on 22 July 2003
Quick instrumentation couplings are
leak-tight
Multiple backup O-rings in the new Hoke HQC quick couplers from Circor Instrumentation ensure leak-tight sealing in vacuum and pressurised systems.
Multiple backup O-rings in the new Hoke HQC quick couplers from Circor Instrumentation ensure leak-tight sealing in vacuum and pressurised systems, with additional robust features designed to provide high reliability at low cost, including positive valve stops that prevent flow checking in the body Teflon-bonded stainless locking "dogs" give a firm grip of the assembly body and locking mechanisms assure smooth sleeve alignment
This article was originally published on Engineeringtalk on 1 Mar 2001 at 8.00am (UK)
Related stories
High temperature ball valve gives long service
The Hoke 7188 ball valve, added to the Flomite 71 Series of two-way integral panel mount valves, features floating ball design, encapsulated seats and check seals for extended leak-tight cycle life
Hoke's Gyrolok nut and ferrule system provides leak-tight end connections, while guides align valves exactly to the coupling's valve seat to prevent the chance of leakage in a disconnected mode.
Offered in 316 stainless steel or brass from 6 to 12mm and available with keyed sleeves interchangeable with Swagelok and Parker components of the same style, the couplers meet ANSI B93.5 and ISO 7241-1/-2 requirements.
Body and plug assemblies are numbered and colour-coded for positive identification.
The couplers will only fit mating keyed components due to a mechanical interlocking system, preventing accidental mixing of fluid or pressure lines.
• Circor Instrumentation: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
