Product category:
Process Hardware (Pipes, Nozzles, Heaters, etc)
News Release from: Circor Instrumentation | Subject: GO Regulator miniature pressure regulators
Edited by the Engineeringtalk Editorial
Team on 30 January 2004
Compact regulators optimise pressure
control
Compact and sophisticated analytical instrumentation can be installed where space is tight but optimal pressure control is required using GO Regulator miniature pressure regulators.
Compact and sophisticated analytical instrumentation can be installed where space is tight but optimal pressure control is required using GO Regulator miniature pressure regulators, now available from Circor Instrumentation with a wider choice of mounting and material options The LG-1 and LB-1 back pressure models are designed for surface, panel or manifold mounting to give maximum system versatility and to suit the widest range of gas or liquid service applications
This article was originally published on Engineeringtalk on 29 Mar 2000 at 8.00am (UK)
Related stories
Miniature pressure regulators in a small size
Two GO Regulator miniature pressure regulators, the LG-1 and the back pressure unit LB-1, combine a compact design and small envelope withwith a large choice of mounting and material options.
With adjustable pressure from 10 to 500lb/in2(g) and a -40 to +177C operating temperature, they can be used in a wide variety of services, including corrosive fluids.
Standard units achieve 0.2% accuracy during supply pressure fluctuation.
Low internal dead volume is less than 2.7cm3 for the ultraminiature LG-1, making it ideal for systems that require rapid purge cycles, and under 3.0cm3 for the LB-1.
Standard flow coefficients are 0.025 Cv on the LG-1 and 0.2 Cv on the LB-1.
• Circor Instrumentation: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
