Product category:
Pneumatic Valves and Controls
News Release from: Circor Instrumentation | Subject: GO Regulator LG1 Series
Edited by the Engineeringtalk Editorial
Team on 21 June 2005
Regulators aid special forces
intervention
GO Regulator LG1 Series single-stage pressure regulators are used by Clucas MoE for reducing and stabilising oxygen released from high pressure cylinders used in rapid entry intervention systems.
GO Regulator LG1 Series single-stage pressure regulators from Circor Instrumentation have been chosen by Clucas MoE for critical duty reducing and stabilising oxygen released from high pressure cylinders used in rapid entry intervention systems employed by military, anti-terrorist, police forces, fire brigades and similar organisations worldwide Tailored to incorporate a tamper-proof cap and specifically oxygen cleaned during manufacture, these 316 stainless body pressure-reducing regulators were selected by for this application on the basis of price, quality, reliability and above all their miniature size
This article was originally published on Engineeringtalk on 1 Mar 2001 at 8.00am (UK)
Related stories
High temperature ball valve gives long service
The Hoke 7188 ball valve, added to the Flomite 71 Series of two-way integral panel mount valves, features floating ball design, encapsulated seats and check seals for extended leak-tight cycle life
Safety pressure relief valve thermally activated
Resistant to mechanical stress and environmental abuse, the Circle Seal Controls PRD thermally activated pressure relief valve is a 'true' safety device offering failsafe venting
"Circor provides an excellent product backed by a very reliable and personal service", said a company spokesman.
Clucas systems for gaining swift access are used on five continents in a wide range of special forces and rescue scenarios.
The GO Regulator LG1 Series is used on several of Clucas MoE products, the Slim Pack, Back Pack and Parri Back.
The equipment, used in conjunction with Kerie Cable, provides portable rapid cutting capabilities to gain fast entry through steel doors etc in a matter of seconds.
LG1 Series regulators can accept high pressures directly from cylinders and other systems, having a 20 micron inlet filter and bubble-tight shutoff.
They feature stainless steel diaphragms with Teflon lining, stainless poppets and better than 25 RA finish in diaphragm cavity.
Mounting styles are surface or panel.
• Circor Instrumentation: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
