Product category:
Process and OEM Valves
News Release from: Contax | Subject: Mta dual dispensing valve
Edited by the Engineeringtalk Editorial
Team on 22 September 2006
Valve automates two-component dispensing
The mta dual dispensing valve offers a fully automated solution for to applications that require two materials to be mixed.
Contax is offering a tried and tested solution to the problem of two-part dispensing with the mta dual dispensing valve This fully automated solution is ideally suited to applications that require two materials to be mixed; for example, with epoxy resin based adhesives, where both the resin and hardening agent need to be combined
This article was originally published on Engineeringtalk on 14 Jul 2006 at 8.00am (UK)
Related stories
Compact Computed Tomography X-Ray System
Contax has announced the availability of the nanotom, a new, compact high resolution computed tomography (CT) x-ray analysis system from phoenix x-ray Systems + Services .
Conveyor has a gentle touch for phamaceuticals
Contax has been working with world leading pharmaceutical company AstraZeneca to significantly improve packaging processes on one line in its UK operations.
There are three problems inherently associated with two-part dispensing.
First, combining the correct ratio of the two components; secondly, ensuring the correct and thorough mixing of materials; and lastly the relatively short period of time in which the mixture must be used.
This process is therefore not an easy task to perform automatically.
Further reading
Vision systems ensure packaging integrity
Vision inspection systems identify potential defects during the packaging process, and so ensure total product integrity.
High head pumps for wastewater pumping
ABS is introducing a new series of HiLift pumps for high head pumping. The new range offers reliable wastewater pumping from buildings and sites.
Some manufacturers have tried to overcome the problems either by premixing volumes of material outside the automated system, or keeping the components apart until the point of dispense and mixing through a passive mixing nozzle.
However, both of these have inherent problems.
mta has developed and patented an automated solution, specifically designed to overcome these issues.
mta's dual part dispensing valve effectively miniaturises the active mixing process at the point of dispense and has been implemented in a relatively low-cost consumable part.
mta's unique design consists of a small mixing chamber which has two side inlet ports, a straight standard dispense needle from the bottom of the chamber, and a short drive shaft exiting through the top.
Inside the chamber, attached to the end of the drive shaft is a small impeller.
This small mixing head is then plugged into the dispensing machine, which has two important features.
First, independent numerically controlled pumps that allow precise control of the ratio of the mix whil preventing any contact between them.
Secondly, a small variable speed motor that engages the impeller drive shaft.
This combination means that the user can not only control the relative volumes being forced through the mixing chamber in any given period of time, but also the mixing impeller speed and therefore the thoroughness of the mixing process.
"This simple design provides a highly effective solution for two-part dispensing", said Phil Shorten, Integrated Automation Group Director at Contax.
"It also has the added advantage that should production be disrupted for any reason, then only a small volume of material is potentially wasted within a relatively low-cost consumable piece part".
"This will make it a very attractive solution for medical and pharmaceutical applications", he said.
• Contax: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
