Product category:
Vision and Colour Sensors
News Release from: Cognex UK | Subject: In-Sight 1000C
Edited by the Engineeringtalk Editorial
Team on 07 June 2005
Vision system is alert to subtle colour
changes
With the ever-increasing need for finely-tuned production lines, manufacturers often look to upgrade their systems in line with technological advances in order to achieve maximum operational output.
With the ever-increasing need for finely-tuned production lines, manufacturers often look to upgrade their systems in line with technological advances in order to achieve maximum operational output At the Johnson Controls plant in Leamington Spa, a production line for the automotive industry was using traditional sensors and it was proving difficult to modify the system should a new part be required
This article was originally published on Engineeringtalk on 1 Nov 2001 at 8.00am (UK)
Related stories
Low-cost, self-contained machine vision sensor
The In-Sight 1000C is a low-cost, self-contained machine vision sensor for verifying and sorting parts based on their colour, and is the first with with built-in Ethernet communications
Vision sensor eliminates count deviations
Eli Lilly and CES have codeveloped a groundbreaking tray inspection system using a colour visual inspection process powered by In-Sight machine vision sensors from Cognex.
Therefore the need arose for a system that could adapt quickly and easily to periodic part structure changes.
Bytronic - a Cognex system integrator - won the contract to provide a fully integrated turnkey solution, including all hardware and software.
Working through the successful system integrator scheme, a number of Cognex's high-performance cameras were selected to ensure the accuracy required would be achieved.
Further reading
Machine vision sensor aids part identification
Cognex unveils self-contained reader for part identification with Ethernet connectivity
Vision system dedicated to electronic production
Cognex has introduced Display Inspect - a machine vision software and hardware package for inspecting displays, keypads, and enclosures on LCD and LED display-based products.
The new system is designed specifically for an application consisting of a car's overhead console with map lamps, microphone, sunroof control, alarm ultrasonics, and a Homelink garage door opener.
The primary objective is to ensure the hand assembled parts are produced in the correct variant of a possible 49.
In addition to these possible part variants, the console is also available in three different shades of beige: oatmeal, dove and champagne.
Therefore, additional checks are required to ensure the correct colours have been assembled together.
These crucial checks are carried out at three separate inspection stations, equipped with two Cognex In-Sight 1000 cameras and one In-Sight 1000C colour camera.
These high-performance vision systems inspect each part variant and colour to ensure the correct sequence is used to assemble each overhead console.
This integrated production solution uses pattern find, histogram and colour histogram tools to identify the parts and the specific colours.
As each part is assembled manually, the Cognex In-Sight cameras are linked to industrial touch screen PCs via Ethernet, and the screen displays step-by-step instructions and pictures to assist in assembly.
The operator interface is achieved using software which monitors all barcode variations and sets up the individual tests.
This software is also used both to read test results from the cameras and control inputs and outputs.
The new system is both faster and more reliable than the old sensor-based system and the main advantages have proved to be when part changes are introduced to the system.
Now, just a simple software change is required instead of a major mechanical change to fit additional sensors.
This means that changes to the production process can be implemented more quickly, reliably and cost-effectively, helping to increase production throughput and minimise costs. Request a free brochure from Cognex UK ...
• Cognex UK: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
