Visit the Flir Systems web site
Click on the advert above to visit the company web site

Product category: Electrical and Electronic Testing and PAT Equipment
News Release from: Cropico | Subject: CR/100 calibration resistor
Edited by the Engineeringtalk Editorial Team on 11 October 2000

Calibration resistor promises long-term
stability

Oil-filled design of the Cropico CR/100 calibration resistor is said to ensure great stability of <+/-0.01% over years of use in applications where very constant operating standards are required

Oil-filled design of the Cropico CR/100 calibration resistor is said to ensure great stability of <+/-0.01% over years of use in applications where very constant operating standards are required and small size is an advantage Also featuring a low capacitance and low inductance design, this 0.02 class calibrated resistor is suitable for direct current and complex frequencies

It is supplied with test certification to ISO 9000.

Compact size is just 38mm high and 97mm wide, with a depth of 41mm or 61mm including clamps, and a weight of 250g.

Rugged construction ensures long life.

Models employ either Manganin sheet metal for the range of 100uohm to 1000mohm or Zeranin wire for 200mohm up to 100kohm .

Designed in 4-wire techniques, they are adjusted at 23C with <0.5W load for their nominal value. Request a free brochure from Cropico ...

Cropico: contact details and other news
Email this article to a colleague
Register for the free Engineeringtalk email newsletter
Engineeringtalk Home Page

Search the Pro-Talk network of sites

Visit the Flir Systems web site