Lean alloy steels lead to smoother transmissions
A
Corus Automotive product story
Edited by the Engineeringtalk editorial team
Jul 28, 2004
Corus has developed a range of lean alloy steels that will enable the automotive gearbox industry to control and predict the level of distortion in the manufacture of transmissions.
Corus has developed a range of lean alloy steels that will enable the automotive gearbox industry to control and predict the level of distortion in the manufacture of transmissions.
This will help the industry produce gearboxes and shafts with improved noise vibration and harshness (NVH) characteristics, and importantly, help both to reduce costs through improved machinability and allow for more environmentally friendly production processes.
The automotive gearbox industry today faces the challenge of manufacturing transmissions that not only meet growing consumer demands for improved refinement and performance but also meet more stringent legislation affecting production and service.
Distortion of material in the manufacture of gearboxes is usually caused by heat treatment after machining.
This is inevitable and is a major contributor to increased NVH, together with a reduction in performance.
However, given the ability to predict the levels of distortion, manufacturers now can allow for its effect and design their processes accordingly.
Using its extensive material knowledge and experience of working with the gearbox industry, Corus Engineering Steels has developed a range of new low alloy gear steels that gives manufacturers this ability to control distortion and limit its impact.
Corus' low alloy gear steels feature unique chemical compositions tailored to produce a tightly controlled and repeatable hardenability response, a critical property for ensuring that fatigue and performance requirements in transmissions are met.
Importantly, these leaner alloy steels display comparable hardenability to the more highly alloyed steels previously available.
Although the new gear steels will be of particular benefit to manufacturers of high volume passenger car and CV gearboxes, Corus Engineering Steels' extensive database of chemical compositions will also enable them to design low alloys steels for specific applications - for example, high-load niche motorsport transmissions.
Controlled distortion in gearbox production allows less machining, resulting in a reduction in manufacturing time and therefore reduced costs.
Corus' lean alloys can also be used in the latest more efficient, low pressure carburising processes which offer manufacturers further cost reduction and important environmental benefits.
In addition, the steels can take advantage of new gas quenching techniques that provide more opportunity for improvements in distortion and, by removing the need to use oil quenchants, brings environmental gains as well.
David Milbourn, Manager Product Technology Corus Engineering Steels, said: "The development of our new range of low alloy steels is yet another example of Corus' commitment to support the automotive industry by providing the latest material innovations that help manufacturers reduce costs whilst improving performance".
"It is further evidence of our capabilities which extend far beyond material development and supply into fundamental application engineering".
Jon King, Director, Corus Automotive said: "This is another important supply chain initiative from Corus".
"As the industry moves towards the latest generation of smaller, six speed transmissions this will increase the power density and loading on gearboxes".
"It is anticipated that this is turn will lead manufacturers to seek more collaborative help from material suppliers such as Corus in finding new and sophisticated material solutions needed to meet the challenges they face".
Corus Engineering Steels currently supplies gear steels to many of the industry's leading manufacturers including BMW, Daimler Chrysler, Eaton, Ford, GM, Scania, Volvo and ZF.
Not what you're looking for? Search the site.
Contact Corus Automotive
Tel (UK) 44 24 76 241200
Other Corus Automotive stories
-
Corus updates Vegter material model
Corus has announced Vegter Lite, an enhanced version of its original Vegter material model released in 2006. -
Argus analysis system helps in Volvo press shop
Corus has employed its Argus strain analysis system to help Volvo optimise its press shop tooling at the Torslanda manufacturing plant in Sweden, in support of the XC60 crossover vehicle launch. -
Predictive modelling validates component strength
Corus worked with Tallent to validate the F2S technique on a suspension lower control arm which uses Corus Tenform XF300 and XF400 HSLA steel grades. -
CAE system checks weld durability
Corus' new automated process will significantly speed up weld design modification and optimisation, leading to improved component performance. -
Latest grades of high strength steels
Corus has been working closely with Ford to help the carmaker develop and implement the latest grades of high strength steels into several key applications on the new Galaxy model range.
Articles by product category
- Consultancy and Services (903)
- Machine Building (4,517)
-
Engineering Design Software (6,179)
- Engineering Design Software (12)
- 2D CAD software (200)
- 3D CAD software (1,157)
- FEA and structural analysis software (369)
- Fluid, thermal, noise, vibration software (334)
- Simulation, modelling, validation software (914)
- Rendering, visualisation, styling software (196)
- Materials design and moulding design software (151)
- Process, instrumentation, automation software (258)
- Electrical design software (164)
- Publishing and documentation software (229)
- Maths, charting, statistics, QA software (317)
- Data, document management software (310)
- CAM, CNC, production management software (568)
- File conversion software, data capture (351)
- PLM and collaboration software (649)
-
Drives, Motors and Controls (3,361)
- Drives, Motors and Controls (1)
- Precision Motors and Gears (411)
- Industrial Drives/Controls (1,276)
- Linear Drives and Motors (114)
- Industrial Motors (497)
- Stepper and Servo Drives, Motors, Controls (1,060)
- Small Mechanical Components, Joining, Tools (1,975)
-
Control and Instrumentation (5,028)
- Plantwide control (1,324)
- Plant- and Machine-Wide Communications (1,174)
- Smaller-Sized PLCs (387)
- CNC and Motion Controllers (184)
- Mid-range and Large PLCs (201)
- Power Supplies, Uninterruptible Power (562)
- HMIs/Operator Interfaces (294)
- Logic Controllers, Timers and Relays (96)
- Cabling, Conduit, Signal Conditioning (806)
-
Monitoring, Measurement and Quality (5,459)
- Monitoring, Measurement and Quality (1)
- Data acquisition Software and Communications (494)
- Data Acquisition Hardware and PC I/O Boards (472)
- Electrical and Electronic Testing, PAT Equipment (630)
- Form/co-ordinate, optical, vision instruments (703)
- Gauges, Indicators and Instruments (440)
- Data loggers (422)
- Materials testing equipment (421)
- Telecomms/network test equipment, software etc (154)
- Testing and Calibration Services and Information (500)
- Testing, analysing and monitoring equipment (1,222)
-
Electrical and Electronic Equipment Design (4,160)
- Batteries, chargers and circuit protection (555)
- Connectors, Terminals, Busbars, Slip Rings (679)
- Enclosures and Equipment Cooling Fans (709)
- Knobs, Handles and Enclosure Hardware (420)
- PCs and Embedded Systems (798)
- Electrical and Electronic Subassemblies (369)
- Electrical and Electronic Components (630)
-
Materials and Processing (2,963)
- Materials and Processing (5)
- Materials and components (2,215)
- Rapid Prototyping (458)
- Materials processing and testing (285)
-
Engineering Industry News, Resources (6,093)
- Engineering Industry News, Resources (4)
- Engineering Business News, Views (388)
- Engineering Exhibitions, Events (562)
- Engineering Conferences (425)
- Engineering Seminars (400)
- Engineering Industry Developments, Awards (633)
- Engineering Guides, Newsletters (349)
- Engineering Recruitment, Employment (219)
- Engineering Training Courses (433)
- Engineering Education, Resources, Standards (838)
- Engineering Industry Reports, Surveys (597)
- Electronic Resources for Engineers (278)
- Health and Safety Legislation (402)
- Health and Safety Strategy, Risk Assessment (113)
- Health and Safety Consultancy, Software (175)
- Health and Safety Events, Training, News (277)
-
Powertrain Design (3,598)
- Powertrain Design (2)
- Bearings (939)
- Chains and belts (326)
- Gears, brakes, couplings and engines (1,441)
- Hydraulic Components (471)
- Lubricants (418)
-
Capital Equipment (3,387)
- Capital Equipment (1)
- Manufacturing Machinery and Plant Equipment (468)
- Production line blowers and fans (62)
- Compressors and Air Treatment (510)
- Electronics Manufacturing, Tools, Instruments (192)
- Electrical hardware (131)
- Machinery and Production Equipment (1,093)
- Robotics, Handling and Storage (930)
-
Sensors (7,080)
- Sensors (8)
- Accelerometers and Vibration Sensors (427)
- Loadcells, Force Sensors, Torque Sensors (699)
- Pressure sensors (621)
- Flowmeters and Flow Sensors (618)
- Level Sensors and Leak Detectors (527)
- Linear Position Sensors (399)
- Rotary Position, Tilt and Angular Sensors (546)
- Proximity Sensors (700)
- Gas, Chemical, Radiation, Magnetic Sensors (284)
- Humidity and Environmental Sensors (152)
- Temperature sensors (612)
- Vision and Colour Sensors (1,384)
- Barcode Sensors (103)
- Valves, Pumps, Process Hardware (3,623)
