Product category:
File conversion software, data capture and plotting
News Release from: Delcam | Subject: STL file repair software
Edited by the Engineeringtalk Editorial
Team on 24 March 2000
Delcam Upgrades STL File Repair Software
Delcam has released a much easier to use version of its STL file repair software, Trifix.
Delcam has released a much easier to use version of its STL file repair software, Trifix This is needed mainly by rapid prototyping bureaux to ensure high quality RP models but can also be used to repair triangle files for analysis software
This article was originally published on Engineeringtalk on 8 Feb 2001 at 8.00am (UK)
Related stories
Easy design of electrodes for the spark erosion
Delcam is to introduce PS-Electrode, a new addition to its Power Solution range of design and manufacturing software that allows quick and easy design of electrodes for the spark erosion of tooling
Delcam links with Renishaw's Digitising Products
Delcam and Renishaw have entered into a development partnership to broaden the functionality within Renishaw's Tracecut software.
The new release gives improved verification and repair of these files, and also incorporates a new interface and more automated operation.
"Most users are now capable of generating satisfactory STL files from models built within a single CAD system," commented Delcam's Product Manager, Chris Lawrie.
"However, there are still problems with data that has been translated between systems, for example when the product designer and the rapid prototyping bureau use different software.
Typical problems that Trifix can solve in these cases include gaps in the model or overlapping surfaces." "CAD models generated from digitised data can also suffer from these problems and Trifix can equally ensure that high quality prototypes can be produced from this type of data." Trifix also allows a range of other common problems with STL files to be rectified.
Duplicate triangles and nodes can be removed, so can triangles with less than a given height, intersecting triangles, and triangles that have more than one other triangle sharing an edge.
Increased "intelligence" within the software means that typically 80% of problems within a file can be solved automatically.
Unlike most other automated healing systems, Trifix does not apply the same tolerance throughout the model.
Instead, it begins working with a low tolerance and solves as many problems as it can.
It then automatically increases the tolerance in a series of steps and tackles the remaining problems as the tolerance increases.
This approach ensures that the underlying surfaces within the model will be changed as little as possible. Request a free brochure from Delcam ...
• Delcam: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
