Visit the Magnetrol International web site

Gas detector features dual redundant light sources

A Detector Electronics (UK) product story
Edited by the Engineeringtalk editorial team Jul 24, 2003

The new Det-Tronics Eclipse OPECL open path gas detection system delivers reliable infra-red combustible gas detection for protection of oil/gas and other industrial facilities.

The new Det-Tronics Eclipse OPECL open path gas detection system delivers reliable infra-red combustible gas detection for protection of oil/gas and other industrial facilities, optimised for low maintenance, low cost and exceptional performance in challenging environmental conditions.

With a sensing path of up to 60m and a response time of less than 3s to 90% of full scale, it features stainless-steel construction, redundant dual xenon flash-lamp technology, unequalled ease of installation and alignment, multiple communication protocols and a 3-year warranty.

Especially useful for perimeter monitoring and applications where leaks can occur over a widely dispersed area, the system detects most flammable hydrocarbon gases and vapours.

Selectable gas settings include methane, ethane, ethylene, propane, butane and propylene.

A linear 4-20mA current source indicates 0 to 5LEL.m gas concentration, with 10.1LEL.m repeatability.

Lower output levels indicate calibration or blocked beam/fault condition.

RS485 Modbus communication protocol is provided, and Hart communication will be available by Q4 of 2003.

A novel xenon flash-lamp configuration provides exceptional system service life, while also providing redundant bulb operation.

If either flash lamp fails, the backup lamp takes over normal operation with no loss of protection or sensitivity.

A signal is generated that notifies operations that the system is operating on a single lamp.

The failed lamp may be replaced when time allows.

System diagnostics information is provided by an onboard, tricolour LED, as well as analogue signal levels.

Optional relay outputs include two programmable alarm relays and one general fault relay.

Alarm thresholds are set using Modbus communication, which also provides viewing of system history logs.

Installation is simplified through the use of indicating laser.

The system also delivers exceptional misalignment tolerance of 10.50.

The system is housed in flameproof enclosures approved for use in Class 1, Division 1 or CENELEC Zone 1 hazardous areas and having ingress protection to IP66, NEMA 4X.

Onboard heaters in both the transmitter and receiver modules melt snow and ice, enabling unattended and uninterrupted operation in inclement weather.

Not what you're looking for? Search the site.

Back to top Back to top

Google Ads

 

Contact Detector Electronics (UK)

Related Stories

Contact Detector Electronics (UK)
Newsletter sign up

Request your free weekly copy of the Engineeringtalk email newsletter ...

Visit the Magnetrol International web site

Articles by product category

All suppliers A - Z

A Pro-talk Publication

A Pro-talk publication