Product category:
Rapid Prototyping
News Release from: Moog FCS | Subject: SLA 7000
Edited by the Engineeringtalk Editorial
Team on 24 June 2003
Stereolithography speeds models to the
wind tunnel
Airbus has purchased an SLA 7000 system to produce components for wind tunnel testing at its operations in Filton, Bristol.
Airbus has purchased an SLA 7000 system to produce components for wind tunnel testing at its operations in Filton, Bristol The system will be used to create larger models with tighter tolerances and high quality surface finish in the wind tunnel
"My background for the last 5 years has been on the test side where we are always under pressure to meet deadlines", said Martin Aston Wind Tunnel Domain Manager for Airbus in Filton.
"We were already using 3D Systems technology through a third-party service bureau and were aware of some of the advantages of stereolithography.
If we are able to build models more quickly we can enter the design cycle later, which gives the aerodynamicist more time to think before committing to a test.
We realised that rather then outsourcing our prototyping and model production, we needed to invest in new technology of our own if we were going to improve our cycle times without lowering our standards".
"We are currently using the SLA 7000 system for our flight physics, which encompasses the aerodynamic groups who submit new geometries for testing in the tunnel.
Typical components include leading edge and trailing edge configurations, flap tracks, pylons and nacelles.
Having our own SLA system on-site allows us to react more quickly and more cost effectively to our bottom line", continued Aston.
"We now try designs we never would have done before because we have the technology on-site.
Effectively we can think of an idea, put it on the system to build overnight or over a weekend and test it the next day.
If the design doesn't work we just repeat the process.
To do that through a service bureau would be almost impossible as the typical turnaround time is four days".
Airbus has started experimenting with models that they would never have attempted or thought possible previously.
Producing plastic models using the SLA system enables Airbus to cater for all of the shapes and curves of aircraft components.
Geometric form and dimensional stability has been dramatically improved, which means the test data is more accurate.
By having the technology on-site a deeper understanding of the process has been invaluable.
This knowledge allows the project coordinator to define and control specific attributes of the geometry by understanding the technology.
They can then communicate these constraints with the operator and part quality can be maintained.
"We have so much more control over the design process now.
This not only leads to cost savings but means that we control the priority and error time.
We no longer have the delay of waiting for returns if we need to build a new iteration, we simply rerun it on the SLA system", stated Aston.
"We chose 3D Systems not only because of the quality of the stereolithography systems, but because we see the company as much more than simply a machine tool supplier", says Aston.
"3D Systems is advising us on the entire process.
That level of partnership is good to see - so many companies would just hand over the machine and tell us to get on with it".
• Moog FCS: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
