Product category:
Cabling, Conduit, Accessories and Signal Conditioning
News Release from: Datwyler (UK) | Subject: Pyrofil safety cable
Edited by the Engineeringtalk Editorial
Team on 20 November 2006
Safety cable meets German rail demands
Munich's underground railway company has trusted Datwyler Cables with the safety cable for the extensions to lines 3 and 6.
Munich's underground railway company has trusted Datwyler Cables with the safety cable for the extensions to lines 3 and 6 The aim of this extension is to provide better connections between the Garching research site and the Moosach district as from 2007
This article was originally published on Engineeringtalk on 3 Sep 2002 at 8.00am (UK)
Related stories
The sweet taste of a fascia panel
Such was the early success of the Flapjack fascia that Datwyler had sold all its stock before the first consignment arrived from Switzerland.
Cat6 connection system is catching on
Datwyler's Unilan Ultimax UTP solution is being installed in a growing number of large-scale building projects around the UK.
Most of the heavy duty cables for the new stretch of line come from Datwyler Cables.
In the north of Munich a total of 100km of safety cable has already been laid.
These are halogen-free cables and, in case of fire, are guaranteed to function as designed for at least 30 minutes.
Further reading
Guard and clip protect against disconnection
Accidental disconnection of computer network systems can have catastrophic consequences, but two simple devices from Datwyler can avoid the problem.
Patch cords comply with Cat6 requirements
As part of it's Unilan Ultimax range, Datwyler and connecting hardware company R and M have brought out a range of Cat6 patch cords.
Datwyler safety cables are being installed in the new sections of the underground railway and is used, among other things, for emergency lighting, lifts and emergency power supply.
An important requirement for this is that the cables have been awarded the necessary test certificates for use with different carrier systems.
In addition they offer the advantage of large installation lengths between mounting clamps (up to 1.20m when laid individually).
Individual stretches underneath the railway stations are equipped with Hermann cable supports from Datwyler.
"Safety cables equipped with these multi-cable supports for cable installations with functional content can be installed efficiently and cost-effectively", explains Johannes Peter, owner of Elektro Peter.
Elektro Peter is responsible for the mounting and installation of the electrical plant.
The laying of emergency power supply cabling is very demanding.
This involves a 6cm-thick safety cable of type Datwyler Pyrofil Keram (N)HXCH 4x185/95 FE 180/E30 which has to be laid at a height of approximately 5m, from station to station.
Because of its halogen-free Keram insulation this cable is relatively light; however, it still weighs around 11t/km.
Pyrofil safety cable from Datwyler fulfils state building regulations, which stipulate that the functional content of the total length of the cable must comply with the DIN4102-12 requirement of at least 30 minutes functioning for all electrical plant.
It is in underground railway tunnels that safety cables make an important contribution towards minimising the spread of fire: on the one hand they supply the installed safety systems during evacuation of the passengers over an adequate period of time.
On the other hand they help health and material damage to be avoided or at least reduced.
Safety cables from Datwyler are used everywhere where large numbers of people gather and where there are very high requirements for protection from fire: underground railways, stations, airports, office blocks, hospitals, hotels and sports stadiums, as well as concert halls and theatres.
• Datwyler (UK): contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
