Product category:
Valve Hardware (Filters, Flow Controls, Positioners etc)
News Release from: ecoTECHNIC | Subject: Ecostop
Edited by the Engineeringtalk Editorial
Team on 06 July 2000
Oil detector closes down drainage
systems
Ecostop provides the safest and most cost-effective method to meet Spill Prevention and Countermeasures (SPCC) requirements
Did you know that one single oil droplet can contaminate one hundred litres of pure drinking water? So it is not hard to imagine, how catastrophic the consequences of not controlling an oil spill can be for our environment, not to mention the liability, cost and fines for the remediation of site spills Ecostop can prevent this scenario from occurring by detecting a spill and shutting the drainage system, therefore keeping the spill on-site
This article was originally published on Engineeringtalk on 5 Jul 2000 at 8.00am (UK)
Related stories
Oil/water separators exceed European standards
Ecosep oil/water separators continuously remove accumulated light liquids (saving disposal cost and avoiding emulsification of the accumulated floatable layer) with a patented automatic oil draw-off.
The system is installed in-line and downstream from any segregated petroleum containment drainage area.
Ecostop is available pre-installed in a standard precast concrete manhole or in an Ecosep Oil/Water Separator.
It can also be retrofitted to an existing drainage system.
Ecostop provides the safest and most cost-effective method to meet your Spill Prevention and Countermeasures (SPCC) Requirements.
Consider Ecostop as your spill control system and insurance against the extreme cost of a major disaster.
• ecoTECHNIC: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
