Product category:
Level Sensors and Leak Detectors
News Release from: Endress + Hauser | Subject: Promass P Coriolis mass flowmeter
Edited by the Engineeringtalk Editorial
Team on 12 October 2007
Flowmeter meets demanding hygiene
standards
The hygienic design of Promass P allows it to drain completely so that no fluids get trapped inside, making it ideal for use in skid-mount applications.
The Promass P Coriolis mass flowmeter meets the needs of the life sciences sector Offering the enhanced performance of a bent-tube meter with the drainability of a straight-tube meter, its single-tube sensor fully complies with the numerous industry-specific requirements, codes and standards such as ASME BPE, ISPE, FDA, EHEDG and 3-A
This article was originally published on Engineeringtalk on 5 Jul 2007 at 8.00am (UK)
Related stories
Level sensors handle tough environments
Solicap M's optional gastight feedthrough provides protection against toxic or aggressive media
Level sensor handles large pressure range
Liquicap M offers a SIL2 rating according to IEC61508 for both low and high demand mode and is ATEX certified to EEx ia and EEx d for hazardous area use.
The hygienic design of Promass P allows it to drain completely so that no fluids get trapped inside, making it ideal for use in skid-mount applications.
The fully welded hygienic design with no moving parts and no internal seals ensures maintenance-free operation, requiring no replacement of parts and allowing no leakage due to seal deterioration.
In addition, the product surface finish is electropolished for a clean, sterile and corrosion-resistant sensor.
It provides a hygienic design for the bioprocessing, life science and cosmetic industries.
It has 3-A authorisation and EHEDG certification.
The single measuring tube technology has no flow splitter, making it suitable for applications where minimal shear stress and careful handling of the product are necessary or applications where low-pressure loss is important.
The Promass P requires no inlet and outlet runs or flow profilers/conditioners, making it easy to install.
The Promass P has been designed to withstand the frequent temperature stresses associated with cleaning and sterilisation.
With no "cool down" period required, it provides instant measurement after CIP/SIP.
Capable of withstanding temperatures of up to 200C, Promass P is resilient to temperature shocks, maintaining accuracy to 0.1% even during cleaning periods. Request a free brochure from Endress + Hauser ...
• Endress + Hauser: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
