Memosens sensors enable two-way data transfer
Endress+Hauser is launching the Memosens digital pH sensors with conductivity and DO sensors as an analytical measuring point solution.
Memosens digital sensors enable process data to be saved directly in the sensor.This inductive, two-way data transfer between sensor and transmitter enables interference-free measuring signals.
The Memosens integrated circuit board enables manufacturing data, current sensor properties and sensor history to be recorded and used as the basis for predictive maintenance
It eliminates issues such as moisture ingress, leakages, corrosion, salt bridges, ground loops and handling via an inductive non-contact, plug-in connection that offers complete galvanic isolation.
The Memocheck Plus qualification tool verifies this data transmission independently of the sensor.
With five plug-in heads (each traceable back to production via a serial number), each simulating a particular sensor status, Memocheck makes measurement integrity watertight.
The Memosens integrated circuit board enables manufacturing data, current sensor properties and sensor history to be recorded and used as the basis for predictive maintenance.
Calibration data is stored, along with other key information such as overall time in operation, and minimum/maximum pH value and temperature.
Memosens sensors can be pre-calibrated under laboratory conditions and then quickly replaced at the measuring point.
The sensors identify themselves within the application and each measuring point recognises its individual sensor.
Memosens also offers a longer life because sensors can be checked and regenerated by cleaning in the laboratory.
Its pre-calibration also means that calibration under soiled or moist conditions is unnecessary and cuts work in hazardous areas to a minimum.
The Memocheck CYP02D service tool provides a quick and easy test of wiring and installation.
It can also be used onsite to troubleshoot a system that has already been commissioned, to establish possible causes of error.
Not what you're looking for? Search the site.
Tel +44 161 286 5000
-
Level monitor provides continuous measurements
Endress+Hauser's Micropilot M FMR245 offers overfill protection and process safety for accurate and level monitoring and overfill protection in solids and liquids applications. -
Radar level gauge has 20m measuring range
Endress+Hauser is offering its Micropilot M FMR240 radar level gauge with non-contact continuous level measurement for overfill protection in a range of applications. -
Micropilot radar offers overfill protection
Endress+Hauser's Micropilot M FMR244 radar offers overfill protection in liquids and solids applications across the food and beverage, chemical, primaries and water industries. -
Endress+Hauser releases temperature transmitters
Endress+Hauser has invested in upgrading its temperature transmitters and introduced terminal heads and displays in order to provide a cost-effective temperature package. -
Proline clamp-on flowmeter measures flow in pipes
Endress+Hauser has launched the Proline Prosonic Flow 93P clamp-on flowmeter, designed for the bidirectional flow measurement of liquids in pipes.
Browse by category
-
Capital Equipment (3,490)
- Capital Equipment (1)
- Compressors and Air Treatment (531)
- Electrical hardware (131)
- Electronics Manufacturing, Tools, Instruments (192)
- Machinery and Production Equipment (1,124)
- Manufacturing Machinery and Plant Equipment (474)
- Production line blowers and fans (73)
- Robotics, Handling and Storage (964)
- Consultancy and Services (917)
-
Control and Instrumentation (5,107)
- Cabling, Conduit, Signal Conditioning (813)
- CNC and Motion Controllers (188)
- Control and Instrumentation (2)
- HMIs/Operator Interfaces (296)
- Logic Controllers, Timers and Relays (96)
- Mid-range and Large PLCs (203)
- Plant- and Machine-Wide Communications (1,197)
- Plantwide control (1,349)
- Power Supplies, Uninterruptible Power (573)
- Smaller-Sized PLCs (390)
-
Drives, Motors and Controls (3,425)
- Drives, Motors and Controls (2)
- Industrial Drives/Controls (1,289)
- Industrial Motors (501)
- Linear Drives and Motors (119)
- Precision Motors and Gears (427)
- Stepper and Servo Drives, Motors, Controls (1,085)
-
Electrical and Electronic Equipment Design (4,280)
- Batteries, chargers and circuit protection (576)
- Connectors, Terminals, Busbars, Slip Rings (711)
- Electrical and Electronic Components (647)
- Electrical and Electronic Equipment Design (3)
- Electrical and Electronic Subassemblies (374)
- Enclosures and Equipment Cooling Fans (720)
- Knobs, Handles and Enclosure Hardware (428)
- PCs and Embedded Systems (821)
-
Engineering Design Software (6,324)
- 2D CAD software (202)
- 3D CAD software (1,178)
- CAM, CNC, production management software (576)
- Data, document management software (321)
- Electrical design software (165)
- Engineering Design Software (17)
- FEA and structural analysis software (376)
- File conversion software, data capture (358)
- Fluid, thermal, noise, vibration software (338)
- Materials design and moulding design software (152)
- Maths, charting, statistics, QA software (324)
- PLM and collaboration software (659)
- Process, instrumentation, automation software (269)
- Publishing and documentation software (234)
- Rendering, visualisation, styling software (206)
- Simulation, modelling, validation software (949)
-
Engineering Industry News, Resources (6,199)
- Electronic Resources for Engineers (278)
- Engineering Business News, Views (388)
- Engineering Conferences (435)
- Engineering Education, Resources, Standards (849)
- Engineering Exhibitions, Events (575)
- Engineering Guides, Newsletters (365)
- Engineering Industry Developments, Awards (636)
- Engineering Industry News, Resources (4)
- Engineering Industry Reports, Surveys (597)
- Engineering Recruitment, Employment (219)
- Engineering Seminars (414)
- Engineering Training Courses (456)
- Health and Safety Consultancy, Software (180)
- Health and Safety Events, Training, News (285)
- Health and Safety Legislation (403)
- Health and Safety Strategy, Risk Assessment (115)
- Machine Building (4,609)
-
Materials and Processing (3,020)
- Materials and components (2,258)
- Materials and Processing (5)
- Materials processing and testing (291)
- Rapid Prototyping (466)
-
Monitoring, Measurement and Quality (5,622)
- Data Acquisition Hardware and PC I/O Boards (486)
- Data acquisition Software and Communications (505)
- Data loggers (425)
- Electrical and Electronic Testing, PAT Equipment (641)
- Form/co-ordinate, optical, vision instruments (757)
- Gauges, Indicators and Instruments (448)
- Materials testing equipment (429)
- Monitoring, Measurement and Quality (1)
- Telecomms/network test equipment, software etc (158)
- Testing and Calibration Services and Information (518)
- Testing, analysing and monitoring equipment (1,254)
-
Powertrain Design (3,693)
- Bearings (973)
- Chains and belts (333)
- Gears, brakes, couplings and engines (1,469)
- Hydraulic Components (474)
- Lubricants (440)
- Powertrain Design (3)
-
Sensors (7,241)
- Accelerometers and Vibration Sensors (446)
- Barcode Sensors (103)
- Flowmeters and Flow Sensors (638)
- Gas, Chemical, Radiation, Magnetic Sensors (289)
- Humidity and Environmental Sensors (157)
- Level Sensors and Leak Detectors (534)
- Linear Position Sensors (412)
- Loadcells, Force Sensors, Torque Sensors (725)
- Pressure sensors (634)
- Proximity Sensors (711)
- Rotary Position, Tilt and Angular Sensors (559)
- Sensors (10)
- Temperature sensors (620)
- Vision and Colour Sensors (1,403)
- Small Mechanical Components, Joining, Tools (2,024)
- Valves, Pumps, Process Hardware (3,712)

