Product category:
Robotics, Handling and Storage
News Release from: Elesa (UK) | Subject: Tube clamp and linear actuator system
Edited by the Engineeringtalk Editorial
Team on 28 June 2004
Clamps take temporary hold
Temporary mounting of equipment can be a real problem, especially if a degree of adjustment is needed for repositioning or during operation.
Temporary mounting of equipment can be a real problem, especially if a degree of adjustment is needed for repositioning or during operation This is a problem often found in laboratory test rigs, building scaffolds, jig building, prototyping, work holding and other temporary frameworks - but it is a problem dealt with by Elesa's new tube clamp and linear actuator system
These high quality tube and clamp elements incorporate slide-through and split type clamps, with hex headed and recessed locking screws.
Precision screw-type linear actuators are fitted to standard tubes for operation of single or dual mounted equipment by means of end-mounted handwheels.
For especially rapid assembly or reconfiguration, the Elesa range of elements may be integrated with the clamping system, for example by use of adjustable clamping handles or hand knobs in place of locking hex-bolts. Request a free brochure from Elesa (UK) ...
• Elesa (UK): contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
