Product category:
Ballscrews, Linear Guides, Jacks, Dampers
News Release from: Elesa (UK) | Subject: GN727
Edited by the Engineeringtalk Editorial
Team on 22 November 2004
Screw offers sensitive micrometer
adjustment
Sensitive micrometer adjustment can be provided using the new Elesa GN727 in either flange or side mounting formats.
In the world of instrumentation and fine machinery, where delicate manual control is vital, sensitive micrometer adjustment can be provided by the new Elesa GN727 in either flange or side mounting formats The GN727 provides accurate control of spindles, lead screws etc with either precise adjustment or alignment to a positive stop position
This article was originally published on Engineeringtalk on 18 Feb 2000 at 8.00am (UK)
Related stories
Machining service eliminates second-op problems
2nd operation machining services from Elesa-Clayton have now been extended to offer boring and reaming to H7 standard, keyway cutting, drill and tap of cross holes and more
Operation has been achieved without backlash for smooth forward/reverse transitions in either 10 or 15 rotation mode - with each rotation corresponding to 1mm and each of 50 graduations on the adjuster knob corresponding to 0.02mm.
Clockwise increasing and anticlockwise increasing types are available for RH/LH applications.
Standard calibration is for metric graduations of linear index, but special requirements may be met to suit custom applications.
All calibration marks are laser engraved - aluminium coloured on the black knob and black on the mat chrome body - this ensures strong contrast levels and a high degree of legibility. Request a free brochure from Elesa (UK) ...
• Elesa (UK): contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
