Product category:
Proximity Sensors
News Release from: Elesa (UK) | Subject: DD51 and DD52
Edited by the Engineeringtalk Editorial
Team on 24 February 2005
Position indicators are sealed front and
rear
The Elesa DD51 and DD52 direct drive digital position indicators are ideal as shaft drive position readouts in industrial environments.
The Elesa DD51 and DD52 direct drive digital position indicators are four- and five-digit sealed case units in a high impact technopolymer housing which is ultrasonically welded making them ideal for shaft drive position readouts in industrial environments This aspect has now been further enhanced by the availability of an additional front seal to prevent ingress of dust in arduous conditions, and of stainless steel reduction sleeves
This article was originally published on Engineeringtalk on 21 Dec 2001 at 8.00am (UK)
Related stories
Indicators ideal for shaft drive position readouts
The Elesa-Clayton DD51 and DD52 direct drive Digital Position indicators are 4 and 5 digit sealed case units in a high impact technopolymer housing ideal for shaft drive position readouts
Reduction sleeves allow the shaft size accommodated to go from 14 down to 6mm in the DD51 and from 20 to 12mm in the DD52.
It is also possible to obtain the DD series to IP67 sealing in batch quantities.
Clearly legible readout is an essential feature of any instrument and this is dealt with by provision for four reading positions which may be specified to suit the orientation, dependant on such factors as horizontal or vertical shaft fitment.
A clear magnifying lens also aids this feature.
A large selection of standard ratios is available for clockwise or anticlockwise rotation, so that generally all that is required is an operating element such as a handwheel or crank handle to complete the installation. Request a free brochure from Elesa (UK) ...
• Elesa (UK): contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page


