Product category:
Springs, dampers, latches, locks and small components
News Release from: Elesa (UK) | Subject: GN350 series
Edited by the Engineeringtalk Editorial
Team on 17 July 2006
Levelling sets handle heavy machines
The GN350 series are ideal for permanent levelling of machine tools, production line machinery, process equipment or gravity transport systems where very accurate degrees of slope may be required.
Accurate levelling of equipment and heavy machinery is facilitated by a new range of levelling sets from Elesa With individual load ratings from 4000 to 49,500kg static load, the GN350 series are ideal for permanent levelling of machine tools, production line machinery, process equipment or gravity transport systems where very accurate degrees of slope may be required
This article was originally published on Engineeringtalk on 18 Feb 2000 at 8.00am (UK)
Related stories
Machining service eliminates second-op problems
2nd operation machining services from Elesa-Clayton have now been extended to offer boring and reaming to H7 standard, keyway cutting, drill and tap of cross holes and more
Normally used in a configuration of three or more per equipment piece, the static load capacity created is sufficient to deal with even very large machinery.
The GN350 levelling sets are available in sizes from 25 to 80mm diameter, and are generally used in conjunction with spherical levelling washers, which take up angular differences in ground or equipment faces to ensure stress free positioning.
Each GN350 set comprises a threaded upper sleeve with a fine thread, which allows a stepless and precise setting and locking using a standard C spanner.
Normally, this screw is permanently and securely locked by the static load generated when the mounting screw is tightened - however if this is not considered sufficient then suitable locknuts are available. Request a free brochure from Elesa (UK) ...
• Elesa (UK): contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
