Product category:
Knobs, Handles and Enclosure Hardware
News Release from: Elesa (UK) | Subject: Square Drive Valve Knobs
Edited by the Engineeringtalk Editorial
Team on 26 July 2006
Square Drive Valve Knobs
Valve knob with updated patented fast fit snap fixing variant, which allows the knob to be pushed on and is retained by a stainless steel spring clip, which locates in a groove machined in the shaft.
Now from Elesa (UK) - the ubiquitous valve knob with updated patented fast fit snap fixing variant, which allows the knob to be pushed on and is retained by a stainless steel spring clip, which locates in a groove machined in the shaft This means that the customer does not have to drill and tap the end of the square shaft
This article was originally published on Engineeringtalk on 18 Feb 2000 at 8.00am (UK)
Related stories
Machining service eliminates second-op problems
2nd operation machining services from Elesa-Clayton have now been extended to offer boring and reaming to H7 standard, keyway cutting, drill and tap of cross holes and more
It also eliminates the time taken fitting the retention screw.
The knob simply pushes on but requires a screwdriver for removal.
Elesa's stylish 5 lobe design in black technopolymer also has standard square drive fitment involving use of a nut or screw to secure the knob, so cover caps in black, red, blue, orange, grey or yellow provide a nice aesthetic touch.
VCRT square drive knobs have a blended radius 5 lobe design with well-proportioned rim height to assure a natural safe and comfortable grip.
Manual operation of valve actuator mechanisms e.g for hydraulic equipment, is made easier by the VCRT lobe knob which is available in sizes from 40mm to 63mm diameter. Request a free brochure from Elesa (UK) ...
• Elesa (UK): contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
