Product category:
Process Hardware (Pipes, Nozzles, Heaters, etc)
News Release from: Elesa (UK) | Subject: SFC tank filler cap
Edited by the Engineeringtalk Editorial
Team on 02 February 2007
Tank filler cap offers two modes of
operation
Elesa's SFC tank filler cap improves safety for users of off-road or transportable equipment.
Elesa has released a tank filler cap for hydraulic systems, with two selectable modes to accommodate transportation and use of the equipment The SFC operates as a standard filler breather and provides for high-volume oil flow in the first mode, with guaranteed high airflow to compensate as the tank fills/empties rapidly
This article was originally published on Engineeringtalk on 18 Feb 2000 at 8.00am (UK)
Related stories
Machining service eliminates second-op problems
2nd operation machining services from Elesa-Clayton have now been extended to offer boring and reaming to H7 standard, keyway cutting, drill and tap of cross holes and more
Mode two is achieved by rotating the cap clockwise on a quick turn thread and this clamps the cap down onto an "O" ring, making a complete seal which prevents breathing and more importantly loss of oil during transportation.
To open the cap for breathing again, the quick turn thread is turned anticlockwise.
If turned past the quick turn thread (not easy to do by mistake) the cap may then be screwed completely off to gain access to the filter medium for cleaning if oil has splashed into it during movement.
By providing both features in one 30mm cap mechanism, Elesa has offered users of off-road or transportable equipment a further aid to safety and convenience in day to day operation and maintenance of their hydraulic systems. Request a free brochure from Elesa (UK) ...
• Elesa (UK): contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page


