Vibrocontrol measures variables simultaneously

Bruel and Kjaer Vibro has released the Vibrocontrol 1500 (VC-1500) enabling the measurement and monitoring of casing vibration, rolling-element bearing condition and temperature.

The acceleration sensor AS-062/T1 integrates a temperature sensor in the housing besides the elements necessary for vibration measurement.

With the mounting of the sensor, all three measured variables are acquired simultaneously and expensive additional components and wiring costs are unnecessary.

Measurement of casing vibration is in accordance with the ISO standard 10816.

The two actual measured values are shown on the display, as well as their percentage values with respect to the set limit set point.

A violation of the preset limit values is signalled visually (LED) as well as through the built-in relays for alert and danger alarms.

For acquiring the rolling-element bearing condition, a Discreet Fourier Transformation (DFT) of the sensor signal in the range 500-5,000 cycles/s is performed, and the sum of the largest RMS value of vibration acceleration is formed.

A comparison with the measured value of the measured value of the bearing (in as new condition), the 'Bearing Condition Value' is displayed.

To provide an overview of the measurement trend, the VC-1500 has a trend-measurement function for the casing vibration, rolling-element bearing condition and temperature.

The display is provided right at the instrument over a selectable period between 10 days and 10 months.

Back to top