Product category:
Accelerometers and Vibration Sensors
News Release from: Endevco | Subject: 65HT-05 triaxial accelerometer
Edited by the Engineeringtalk Editorial
Team on 02 November 2007
Miniature accelerometer takes high
temperatures
Endevco 65HT-05 allows the user to measure the accelerations of three orthogonal axes of vibration simultaneously on lightweight structures with minimal mass loading effects.
Endevco has released the 65HT-05 triaxial, high-temperature accelerometer The model 65HT-05 expands on the model 65HT family of products designed for automotive test cells, environmental and aerospace test chambers and general laboratory applications where high resolution is needed in a very compact package
This article was originally published on Engineeringtalk on 31 Mar 2003 at 8.00am (UK)
Related stories
Accelerometer resists interference
The Endevco Model 7293A Microtron accelerometer family uses unique variable capacitance microsensors and incorporates special filtering and shielding for EMI and RFI exposure.
New range of industrial accelerometers
This range of industrial Isotron accelerometer types use an Endevco high performance shear design piezoelectric sensor, with integral low-noise hybrid electronics
It is a miniature, high-temperature device packaged in a 10mm cube of welded titanium, weighing only 5g.
Is micro-electronic circuits are designed to operate up to +175C with a sensitivity of 0.5mV/g.
With excellent amplitude and phase frequency response, the model 65HT-05 provides a triaxial accelerometer ideally suited for structural and component testing in a wide range of applications.
Its reduced size enables the test engineer or technician to measure the accelerations of three orthogonal axes of vibration simultaneously on lightweight structures with minimal mass loading effects.
The model 65HT-05 features a shock-proof design that will withstand a peak shock limit of 15,000g.
Additional features include overload protection, low-impedance output, a resonance frequency of 40,000Hz, adhesive or thread mounting and a four-pin Microtech style, side-mounted connector.
Power is provided via a constant current travelling through the same pins as the low-impedance output signals.
The model 65HT-05 is supplied with high-temperature cable assemblies as a standard accessory, as well as petro wax, screw cap and screw set.
Options include high-flex, high-strength cable and an adhesive/clip adapter.
The existing model 65HT-1 and model 65HT-10 are available under the Endevco Replacement Sensors programme.
The programme is a cost-effective way to update or upgrade existing test cells with Endevco accelerometers without needing to purchase the standard accessories and cables provided with the initial sensor order.
• Endevco: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
