Pneumatic actuators cut maintenance requirements
A
Festo product story
Edited by the Engineeringtalk editorial team
Oct 19, 2006
Custom designed pneumatic valve actuators feature at the Thames Water Ashford Common water treatment plant.
Thames Water is justifiably proud of its Ashford Common water treatment plant.
It processes about 690 million litres a day and satisfies a quarter of London's entire potable water needs.
Ashford Common is one of the larger treatment plants clustered on the Thames above Teddington Weir - others include Hampton, Walton and Kempton.
The Ashford Common plant is supplied by five fixed-speed pumps, and employs a 1600mm butterfly valve as a gravity bypass and to control flows onto the works.
The valve is located halfway down a 30 metre shaft.
Towards the end of last year, Thames Water commissioned a replacement for this main gravity valve, because although the existing electrically actuated valve was only 12 years old, it required frequent movement to provide adequate flow control.
Although numerous attempts had been made over the years to optimise the valve's performance, it still required actuating every 10 minutes.
Also, the valve constantly oscillated under load conditions and required frequent servicing, which was proving inconvenient and costly, due to its relatively inaccessible location.
Thames Water's main contractor - Costain - consequently tasked the process valve manufacturer Erhard to come up with a suitable alternative.
Erhard chose to base the new valve design on a pneumatic, rather than electrical, actuator.
This offered a much more robust control solution, with minimal maintenance requirements.
The valve's pneumatic actuator is a custom designed unit produced by Festo, which is coupled directly to the butterfly vane without gearing or spindles.
The system is controlled by a remote Siemens PLC, with local operator override facilities for routine inspection.
Pneumatic valve actuators provide interesting cost and performance benefits for process valve actuation.
Pneumatic cylinders are inherently compact actuators with high force capacities and overload capabilities.
Using compressed air as the drive medium provides a safe and reliable solution that copes with fluctuations in actuation forces, temperature and humidity and delivers an operating life of more than 2 million cycles - which is up to 10 times more than a typical electrically operated valve.
Given the importance of Ashford Common's contribution to London's water supplies, it was essential that the valve replacement was handled as quickly and efficiently as possible.
Festo's service partner, Aspects Engineering, successfully carried out all system installation tasks.
The entire procedure was rehearsed repeatedly prior to implementation, to ensure that no last-minute problems would be encountered by the engineers while working in the confined space of the shaft.
It says much for the professionalism of all parties that the entire task was completed in just 16 hours - some 8 hours less than the allocated time.
The valve was replaced on 7th December 2005, and went completely unnoticed by the company's customers, though it did win an accolade from Phil Stride, Thames Water's Director of Operational Control, who called it "an exemplary piece of work, well-planned and executed, which enabled Ashford Common to return to full production ahead of schedule".
According to Paul Davies, Thames Water's Project Manager: "We are exceptionally pleased with the performance of this valve".
"It is much more responsive to control signals and oscillates significantly less than its electrically actuated predecessor".
"As a result, we expect less premature valve wear".
"It seems apparent that pneumatically actuated valves offer numerous operational advantages over electrically actuated valves in this environment".
"I have also been very pleased with the technical support provided by Festo during this project and we are now considering pneumatic actuation in other areas".
Not what you're looking for? Search the site.
Contact Festo
Tel +44 1252 775000
Other Festo stories
-
Festo cylinders employ linear-motor technology
Festo has launched two series of high-performance electric cylinders employing the company's tubular linear-motor technology. -
Festo cushioning offered on DSNU actuator
Festo has developed a self-adjusting pneumatic cushioning system, available as a build-to-order option for the company's DSNU series round-cylinder pneumatic actuators. -
Festo unveils linear motor based actuators
Festo has developed a class of electric actuators based on very high-performance linear motors. -
Festo solutions aid Guernsey water treatment plant
Guernsey Water has adopted various valve solutions recommended by Festo at one of the island's water treatment plants to improve the supply of drinking water to about 24,000 households and businesses. -
Festo valve for pneumatically-operated automation
Festo has launched the MS6-SV electrically-operated pneumatic soft-start and exhaust valve that provides safer start-up and reliable venting of compressed air supplies in the event of an emergency.
Browse by category
-
Capital Equipment (3,488)
- Capital Equipment (1)
- Compressors and Air Treatment (531)
- Electrical hardware (131)
- Electronics Manufacturing, Tools, Instruments (192)
- Machinery and Production Equipment (1,123)
- Manufacturing Machinery and Plant Equipment (474)
- Production line blowers and fans (73)
- Robotics, Handling and Storage (963)
- Consultancy and Services (917)
-
Control and Instrumentation (5,105)
- Cabling, Conduit, Signal Conditioning (813)
- CNC and Motion Controllers (188)
- Control and Instrumentation (2)
- HMIs/Operator Interfaces (296)
- Logic Controllers, Timers and Relays (96)
- Mid-range and Large PLCs (203)
- Plant- and Machine-Wide Communications (1,197)
- Plantwide control (1,347)
- Power Supplies, Uninterruptible Power (573)
- Smaller-Sized PLCs (390)
-
Drives, Motors and Controls (3,421)
- Drives, Motors and Controls (2)
- Industrial Drives/Controls (1,289)
- Industrial Motors (501)
- Linear Drives and Motors (119)
- Precision Motors and Gears (425)
- Stepper and Servo Drives, Motors, Controls (1,083)
-
Electrical and Electronic Equipment Design (4,276)
- Batteries, chargers and circuit protection (575)
- Connectors, Terminals, Busbars, Slip Rings (709)
- Electrical and Electronic Components (647)
- Electrical and Electronic Equipment Design (3)
- Electrical and Electronic Subassemblies (374)
- Enclosures and Equipment Cooling Fans (719)
- Knobs, Handles and Enclosure Hardware (428)
- PCs and Embedded Systems (821)
-
Engineering Design Software (6,319)
- 2D CAD software (202)
- 3D CAD software (1,177)
- CAM, CNC, production management software (576)
- Data, document management software (320)
- Electrical design software (165)
- Engineering Design Software (17)
- FEA and structural analysis software (376)
- File conversion software, data capture (358)
- Fluid, thermal, noise, vibration software (338)
- Materials design and moulding design software (152)
- Maths, charting, statistics, QA software (324)
- PLM and collaboration software (658)
- Process, instrumentation, automation software (269)
- Publishing and documentation software (234)
- Rendering, visualisation, styling software (206)
- Simulation, modelling, validation software (947)
-
Engineering Industry News, Resources (6,198)
- Electronic Resources for Engineers (278)
- Engineering Business News, Views (388)
- Engineering Conferences (435)
- Engineering Education, Resources, Standards (849)
- Engineering Exhibitions, Events (575)
- Engineering Guides, Newsletters (365)
- Engineering Industry Developments, Awards (636)
- Engineering Industry News, Resources (4)
- Engineering Industry Reports, Surveys (597)
- Engineering Recruitment, Employment (219)
- Engineering Seminars (414)
- Engineering Training Courses (456)
- Health and Safety Consultancy, Software (180)
- Health and Safety Events, Training, News (284)
- Health and Safety Legislation (403)
- Health and Safety Strategy, Risk Assessment (115)
- Machine Building (4,608)
-
Materials and Processing (3,020)
- Materials and components (2,258)
- Materials and Processing (5)
- Materials processing and testing (291)
- Rapid Prototyping (466)
-
Monitoring, Measurement and Quality (5,620)
- Data Acquisition Hardware and PC I/O Boards (485)
- Data acquisition Software and Communications (505)
- Data loggers (425)
- Electrical and Electronic Testing, PAT Equipment (641)
- Form/co-ordinate, optical, vision instruments (757)
- Gauges, Indicators and Instruments (448)
- Materials testing equipment (429)
- Monitoring, Measurement and Quality (1)
- Telecomms/network test equipment, software etc (158)
- Testing and Calibration Services and Information (518)
- Testing, analysing and monitoring equipment (1,253)
-
Powertrain Design (3,691)
- Bearings (973)
- Chains and belts (333)
- Gears, brakes, couplings and engines (1,469)
- Hydraulic Components (473)
- Lubricants (439)
- Powertrain Design (3)
-
Sensors (7,237)
- Accelerometers and Vibration Sensors (446)
- Barcode Sensors (103)
- Flowmeters and Flow Sensors (637)
- Gas, Chemical, Radiation, Magnetic Sensors (289)
- Humidity and Environmental Sensors (157)
- Level Sensors and Leak Detectors (534)
- Linear Position Sensors (412)
- Loadcells, Force Sensors, Torque Sensors (724)
- Pressure sensors (634)
- Proximity Sensors (710)
- Rotary Position, Tilt and Angular Sensors (559)
- Sensors (10)
- Temperature sensors (620)
- Vision and Colour Sensors (1,402)
- Small Mechanical Components, Joining, Tools (2,021)
- Valves, Pumps, Process Hardware (3,708)
