Product category:
Fluid, thermal, noise and vibration analysis software
News Release from: Flomerics | Subject: Flotherm thermal management software
Edited by the Engineeringtalk Editorial
Team on 03 May 2001
Roof-mounted DVD player stays as cool as
possible
Electronic design engineers at Delphi Delco Electronics Systems have solved the problem of solar heating impacting the reliability of their in-car roof-mounted DVD player using Flotherm software
Electronic design engineers at Delphi Delco Electronics Systems, specialists in mobile multimedia products for automotive use, have solved the problem of solar heating impacting the reliability of their in-car roof-mounted DVD player using Flotherm thermal management software from Flomerics Housed just 25 mm below the roof of the car, the DVD player was particularly vulnerable to solar heating in stationary vehicles
This article was originally published on Engineeringtalk on 14 Aug 2001 at 8.00am (UK)
Related stories
Development time cut by thermal design software
PipingHot Networks, developer of broadband wireless access equipment, has slashed 3 months off the development time for a customer subscriber unit by using Flotherm thermal management software
Thermal software speeds enclosure design
Significant savings in both time and capital expenditure have been reported at Advanced Fibre Communications after completing a major new product using Flotherm thermal management software
The rear-seat system consists of a DVD player in a sheet-metal wraparound housed in a plastic enclosure, which forms part of the roof-mounted console.
A fan removes heat from inside the wraparound, cooling the DVD and the four board-mounted linear regulators on the main board.
Using Flotherm to assess the venting system and to predict the airflow path around the DVD's optics, electronic design engineers at Delphi Delco were able to determine the most efficient cooling solutions for the device, which dropped steeply in reliability at temperatures greater than 80C.
It was also important for the regulator junction temperature to stay below 125C during steady state operation.
Analysis and experiments showed that the thermal resistance of the DVD player depended strongly on the nature of venting, and that system level modelling of the entire airflow path was the best way to estimate optics temperatures.
Using Flotherm from Flomerics, engineers from Delphi Delco were able to predict heat transfer by conduction, convection and radiation simultaneously.
Flotherm's SmartParts, such as blocks, resistances, fans and vents, helped Delphi Delco to create a complete system level thermal model quickly.
When the original design was tested, the DVD player ran too hot.
Several different design configurations featuring different orientations of baffles and fans were tested before settling on a hybrid approach of reducing power and adding vents.
The final optimized design kept the DVD running below its maximum temperature even on a hot sunny day.
The final design involved adding a switcher to the circuit, which added to the cost, but eliminated the need to investigate exotic cooling solutions.
"Flotherm simulations guided the design of the enclosure surrounding the mechanism, and extensive experimental studies helped corroborate the results of the analysis", concluded Arvind Krishna from Delphi Delco Electronics Systems. Request a free brochure from Flomerics ...
• Flomerics: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
