Product category:
Fluid, thermal, noise and vibration analysis software
News Release from: Flomerics | Subject: EFD.Lab
Edited by the Engineeringtalk Editorial
Team on 17 October 2006
CFD software masters fluidic oscillation
Actaris has used EFD.Lab computational fluid dynamics software to design innovative gas meters.
Actaris used EFD.Lab computational fluid dynamics (CFD) software from Flomerics to design innovative gas meters Actaris fluidic meters work on a unique principle of putting an obstacle in the flow stream and using a sensor to measure the resulting oscillations to determine the flow rate
This article was originally published on Engineeringtalk on 2 Jul 2008 at 8.00am (UK)
Related stories
Software helps with performance sail development
WB-Sails uses EFD.Lab to pinpoint problem areas in sails where flow separation is likely to occur, creating drag and slowing the boat.
Fluid dynamics software aids extractor hood design
EFD.Lab engineering fluid dynamics software from Flomerics helped Marenco half the time it would normally have taken it to design an extractor hood.
"EFD.Lab enabled Actaris engineers to quickly and accurately simulate the flow velocity, direction and pressure, making it possible to evaluate new design concepts without the expense and leadtime required to build multiple prototypes", said Ibne Soreefan, Project Manager for Actaris.
"EFD.Lab also provided far more diagnostic information than can be obtained by testing a prototype, enabling engineers to move more directly to an optimised design".
Actaris is a world leader in the design and manufacturing of meters and systems for the electricity, gas, water and heat markets.
Further reading
Fluid dynamics software helps ship design
EFD.Lab meets Saipem's needs for shortened design time and ease of use in the design of transportation barges, construction and drilling vessels and deck structures.
Fluid analysis software saves time and money
Flomerics' EFD.Lab allowed Shaw Aero Devices to produce an acceptable software prototype in a single day.
Actaris' Dattus fM2 gas meter is based on the fluidic oscillation principle.
The gas flow is divided to eliminate upstream disturbances then recombined and directed against an obstacle.
The jet oscillates back and forth and thermal sensors detect temperature variances as the jet oscillates.
The volume of gas passed through the meter is obtained by counting the number of oscillations detected by the sensors.
This innovative design is very compact and has no moving parts so it lasts longer and requires less maintenance than competitive designs.
Actaris engineers faced difficult challenges in developing this unique design.
For example, it's important that the flow pattern within the meter be the same over a wide range of flow rates in order to maintain accuracy of the meter over this range.
Building and testing prototypes makes it possible to evaluate the accuracy of the meter but does not show the flow pattern so it is difficult to determine the cause of inaccuracies.
Actaris engineers previously used CFD software whose cost was so high that it squeezed the engineering budget.
They switched to EFD.Lab after Flomerics support engineers demonstrated that they could provide the same accuracy as the high-end software at a fraction of the cost.
EFD.Lab also requires considerably less time to simulate gas meter flow.
In designing the Dattus fM2 meter, Actaris engineers evaluated a wide range of concept designs using software prototypes.
They visualised the flow inside each design at flow rates that covered the meter's entire application range.
They viewed the flow development as the flow rate increased and the flow moved from laminar to turbulent.
They observed vortices and followed how they changed over the flow rate.
"These simulations helped us visualise the flow and understand the sensitivity of the meter to key design parameters, and thus converging toward the optimised prototype in less time". Request a free brochure from Flomerics ...
• Flomerics: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
