Product category:
Electrical and Electronic Testing and PAT Equipment
News Release from: Fluke (UK) | Subject: Fluke 1651/Part P multifunction tester
Edited by the Engineeringtalk Editorial
Team on 07 October 2004
Multifunction tester covers new building
regs
Fluke is offering a new, low-cost multifunction tester to complement the Fluke/Robin 1650 Series models introduced in 2003.
Fluke is offering a new, low-cost multifunction tester to complement the Fluke/Robin 1650 Series models introduced in 2003 This model is specially designed to test all the requirements in the new Part P Building Regulations with one single piece of equipment
This article was originally published on Engineeringtalk on 5 Mar 2001 at 8.00am (UK)
Related stories
CAT IV safety rating on new digital multimeters
Fluke has introduced the 170 Series Digital Multimeters with lifetime warranties and the latest category IV safety ratings, designed for use up to 1000V and 10A AC or DC
Rugged temperature calibrator ideal for the field
Designed for process instrument technicians, the Fluke 724 Temperature Calibrator can test and calibrate almost any temperature instrument.
Coming into force on 1st January 2005, Part P requires, with some exceptions, all new domestic electrical installations, as well as alterations and additions to existing installations, to be tested by authorised contractors, or inspected by local Building Control, for compliance with BS7671.
The new Fluke 1651/Part P multifunction tester performs tests of residual current activated devices (RCDs), in addition to the primary tests of voltage, frequency, continuity, insulation resistance, loop impedance, PSC and PFC tests.
The 1651/Part P uses a unique and patented advanced loop measurement technology to prevent electronic and passive type RCDs from tripping during earth-loop testing, whilst also giving highly consistent and repeatable results.
It is supplied as a complete kit with test leads, crocodile clips, heavy-duty carrying case, neck strap, mains connection lead, language reference card and an operating manual on CD-ROM.
The Fluke 1651/Part P is extremely easy to operate and features a large backlit display with a wide viewing angle.
Worn on a neck-strap, its unique ergonomic design, extremely low weight and intuitive user interface make it an ideal tool for comfortable testing.
Safe usage is enhanced with a built-in live voltage indicator.
Aimed at domestic installations, the 1651 does not offer the automatic RCD testing functionality or the remote probe supplied with the 1652, nor the advanced capabilities of the 1653 to upload stored results later to a PC for software analysis, and to provide earth resistance and phase sequence measurement.
All three models make up the full range of very rugged Fluke/Robin 1650 Series multifunction testers.
The Fluke website lists a series of downloadable installation tester application notes that highlight particular uses.
The new unit is available from authorised Fluke and Robin wholesalers and distributors at a recommended trade price of GBP 499. Request a free brochure from Fluke (UK) ...
• Fluke (UK): contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
