Flow switches are easier to fit

A Gentech International product story
Edited by the Engineeringtalk editorial team Jul 5, 2005

Gentech's "easy fit" flow switches are designed to reduce the time to fit and prepare the pipework without compromising the pressure seal.

Gentech's "easy fit" flow switches are designed to reduce the time to fit and prepare the pipework without compromising the pressure seal.

Without the usual coupling and sealing components - compression fittings or a threaded connection - all that is required is a simple push-fit to insert the 22mm copper pipe.

The FS13 and the FS14 versions of the Gentech flow switch family have brass housings and Noryl internal components; the robust construction is ideal for a range of applications from domestic boiler heating systems to industrial circulating pumping systems or liquid dispensing applications.

With the sensor connected and mounted vertically in the pipework, the switch will operate with a liquid flowing at a rate of up to 1 litre/min, and the maximum working pressure rating of the flow switch is 10bar at 20C.

The operating temperature range is -30 to +100C.

The FS13 is designed for use in AC circuits, 250V RMS, with 3A switching capability for pump control or relay switching.

For DC applications, the FS14 will switch 300V DC at 1Ap with a maximum power handling of 15W, for electronic circuits or interfaces.

The repeatability and the low flow rate make this sensor ideal for boiler interlock circuits, circulating water and pump protection circuits.

Not what you're looking for? Search the site.

Back to top Back to top

Google Ads

 

Contact Gentech International

Related Stories

Contact Gentech International

 

Newsletter sign up

Request your free weekly copy of the Engineeringtalk email newsletter ...

Articles by product category

All suppliers A - Z

A Pro-talk Publication

A Pro-talk publication