Visit the Flir Systems web site

Cost effective solution for level measurement

A Gentech International product story
Edited by the Engineeringtalk editorial team Aug 30, 2005

Gentech has developed a range of sensors within the EVS series, that are mounted typically at the top of the tank, with up to four switching points, with two or four floats on a single stem.

In a tank or chamber when it is necessary to be kept informed of the liquid level the measurement accuracy required will reflect the value of the medium (eg water or liquid gold), the value of the equipment or to protect the process involved.

One solution is to have multiple-point sensing, achieved by mounting a string of single sensors and at a given point, indication of the fluid level is recorded.

The arrangement of these sensors can be either independently mounted at the side of the tank, or via a single stem within the chamber with top or bottom entry and having float switch stations at each stage.

Gentech has developed a range of sensors within the EVS series, that are mounted typically at the top of the tank, with up to four switching points, with two or four floats on a single stem.

With a combination of floats and switches over a length of up to 1m to give high and low level in a zone or four independent switch points as the most cost effective solution.

In addition integral wiring of two wires per switch or a matrix of wiring and switching outputs makes it possible to achieve cost savings within the control circuit (and wiring harness).

Also available is an option to incorporate a resistor networks for diagnostics routines or "open circuit" wiring integrity checks.

The EVS Series is available constructed in the following materials: nylon 6.6, PVC, stainless steel, or brass stem with Buna float.

This range of materials offers chemical resistance to a large number of fluids, and applications have been satisfied including water, deionised water, hydrocarbons, and water/glycol mixture.

Mounting options are available for internal or externally tank fitting, via BSP or NPT mounting bush or SAE flange.

The electrical connections can be flying lead or with a specified connector to enable quick installation and or maintenance within the tank to be carried out.

Not what you're looking for? Search the site.

Back to top Back to top

Google Ads

 

Contact Gentech International

Related Stories

Contact Gentech International

 

Newsletter sign up

Request your free weekly copy of the Engineeringtalk email newsletter ...

Visit the Flir Systems web site

Articles by product category

All suppliers A - Z

A Pro-talk Publication

A Pro-talk publication