Product category:
Data acquisition Software and Communications
News Release from: HBM UK | Subject: CP22 computer interface
Edited by the Engineeringtalk Editorial
Team on 14 March 2003
Interface speeds acquisition
The CP22 computer interface complements the MGCplus multichannel data acquisition system by allowing rapid communication from sensors.
HBM has introduced the CP22 computer interface to complement its MGCplus multichannel data acquisition system by allowing rapid communication from sensors The CP22 is available with three interfaces, including an RS232 serial link, to meet every requirement
For larger networks the TCP/IP, 10/100Mbit Ethernet is probably the best solution as it allows transmissions of over 150,000 measured values per second, across a maximum of 64 channels, each operating at a 2.4kHz sample rate.
Alternatively, the 1.1 USB interface allows transmissions of more than 50,000 measured values per second across a maximum of 24 channels operating at a 2.4kHz sample rate.
The USB interface also allows USB printers to be connected enabling measurements to be documented without the need for a PC.
The CP22 is designed to automatically recognise tasks and is suitable for synchronising several MGCplus systems. Request a free brochure from HBM UK ...
• HBM UK: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
