Product category:
Loadcells, Force Sensors and Torque Sensors
News Release from: HBM UK | Subject: Strain gauges
Edited by the Engineeringtalk Editorial
Team on 28 March 2003
Prewired strain gauges save time
HBM's latest strain gauges are fitted with preassembled connecting cables to facilitate handling and save time, and are available in two-, three- or four-wire configurations.
HBM's latest strain gauges are fitted with preassembled connecting cables to facilitate handling and save time, and are available in two-, three- or four-wire configurations The variations are each mounted on a common carrier with every strain gauge having two Teflon-coated wires attached to it
This article was originally published on Engineeringtalk on 24 Nov 2003 at 8.00am (UK)
Related stories
Measuring system takes the strain
The Canhead system can reduce installation costs during experimental stress analysis using strain gauges and is particularly suited to tests involving some hundreds or thousands of measuring points.
The strain gauges have been designed to be easier to fit by inexperienced or infrequent users.
They are easier to fit in difficult areas and there is no need to solder the gauges onto delicate or sensitive areas.
Strain gauges (SG) measure very small deformations on moving or mechanically loaded test objects.
HBM supplies a wide range of additional data acquisition and analysis equipment to allow forces and stress states to be determined with very high degrees of accuracy.
HBM also provides seminars and hands-on workshops to help end-users improve their knowledge and practical experience of strain gauge technology. Request a free brochure from HBM UK ...
• HBM UK: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
