Product category:
Ballscrews, Linear Guides, Jacks, Dampers
News Release from: HepcoMotion | Subject: HDS Heavy Duty
Edited by the Engineeringtalk Editorial
Team on 19 August 2005
Heavy-duty guides take the strain at
Stahl
In the past, the assembly of the drives for rope and chain hoists at mechanical handling specialist Stahl was a manual operation.
In the past, the assembly of the drives for rope and chain hoists at mechanical handling specialist Stahl was a manual operation Drives weighing up to 200kg were lifted onto the workbench with the help of a crane; but from then on it was a hands-on affair
The cost of this manhandling was significant, both to the assemblers and the company.
Sickness due to pain and injury was mounting and valuable man-hours being lost.
The company resolved to automate the process but the heavy weights involved demanded the careful choice of system components.
The HepcoMotion HDS Heavy Duty linear motion system and MCS aluminium profile system both proved equal to the task and cost competitive.
A year on, the system is working well, bringing unexpected benefits and also reported to be a source of considerable work motivation.
The HepcoMotion Heavy Duty system was chosen to accommodate the substantial combined loads of both the drive and the stabilising device.
Typical load is 200kg.
The linear slide system is mounted directly onto the HepcoMotion MCS frame, as is the hydraulic cylinder responsible for lifting and rotating the drives.
A special in-house designed carriage plate to accommodate the drives is fitted to the slide system.
The resultant bespoke system has been configured to handle a variety of drive types to which a range of electric motors are fitted.
The drives are now lifted from a height of 700-1000mm and turned through 360 degrees at a typical rate of six per hour over a 16-hour shift.
As this operation is both smooth and efficient by comparison with the manual procedure it replaced, the drive can be positioned precisely to suit each stage of the operation.
The process of filling the drive with gear oil is now easier and far more efficient and the identification number of the drive can now be printed onto the top of the unit rather than on its side, greatly improving legibility.
Key to the performance of the HDS system and therefore an important factor in Stahl's choice of the system, is its V-guide principle.
The proven benefits of this principle over recirculating alternatives are quiet operation, very low friction, immunity to dirt ingress, and low maintenance.
It is the ideal choice for harsh environments.
The added benefit of the HDS system is that its 95mm V-slot bearing offers a load bearing capacity of up to 20kN.
All linear rails are supplied in one piece up to a length of 4m.
Above that length, the rail sections can be butted together but with no loss of accuracy.
Stahl estimates a time saving of 75% in the construction of the machine's framework by opting for a modular system such as the HepcoMotion MCS.
The HDS and MCS systems are fully compatible, and the latter comprises a wide range of aluminium profiles and connecting components making it easy to tailor the frame to the application precisely.
An important benefit of the MCS programme is that its components can be used again for other purposes after they have been dismantled.
The semi-automated assembly system at Stahl has considerably reduced sick leave and downtime and testimony to its success is the company's commitment to equip further workstations. Request a free brochure from HepcoMotion ...
• HepcoMotion: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
