Product category:
Production Services
News Release from: H C Holifield (Oxford) | Subject: Contract machining
Edited by the Engineeringtalk Editorial
Team on 28 October 2002
Novel approach pays dividends for
machinist
To find a way to manufacture an electric motor cover economically for one of its customers, Holifields decided to produce both parts of the assembly in multiple operations using different techniques.
To find a way of manufacturing an electric motor cover economically for one of its customers, Abingdon-based Holifields decided to produce both parts of the end assembly in multiple operations using different machining techniques First the company cuts out the blanks on a high-pressure water jet profiler, then it mills and drills them on one or two machining centres
This article was originally published on Engineeringtalk on 1 Nov 2002 at 8.00am (UK)
Related stories
Vertical turning lathes keep production costs down
Another example of the increasing popularity of self-loading vertical turning lathes (VTLs) are the two Hitachi Seiki hanging-spindle CS25s installed in August 2002 at Holifields.
Stock holding provides subcontracting edge
Some subcontractors are extending the service they offer to manufacturers by not only producing components but also stocking them free of charge for subsequent delivery when needed, just-in-time.
The approach won the business for the contract machinist, whereas prismatically machining these end flanges from the solid would have been too time consuming and expensive, and in any case could not have been completed in one hit.
Two different types of flange are involved, the larger being the more complex.
In the latter case, the process starts with cutting a 2.5m x 1.25m x 25mm thick 6082T6 aluminium plate into two halves and profiling an array of nested semicircular rings from each plate simultaneously on a twin-head Flow machine.
Further reading
Telescopic probe aids in-flight refuelling
Having worked with Flight Refuelling for the last four years, Pershore based Accura Geneva has seen the relationship develop into one that is today an example of a true partnership between companies.
Subcontract honing service shows its experience
Apperley Honing's specialist subcontract honing division has seen an 18% increase in sales over the past 12 months.
Feed is set at 90mm/min to achieve a good quality, square edge as specified by the customer.
The part is then put up on a 12-station, turret-type Miyano TSV-35 machining centre where the inside radius is skimmed and one millimetre is milled off the thickness.
A boss on one side is finish machined to a depth of 10mm and an 11mm hole is drilled through it.
The process is completed on a four-axis vertical machining centre, normally either a Hitachi Seiki VS40 or a Daewoo ACE V50.
After clamping the part vertically on an indexing head, two holes are drilled and rigid tapped at 90 degrees in the flange ends.
After indexing through 22.5 degrees, a third M6 hole is drilled and tapped at an intermediate angle on the outside of the semi circular profile.
Virtually any machining centre on Holifields' shop floor could carry out the first prismatic operations, including the machines that perform the second drill/tap cycle, so considerable flexibility exists for allocation of resources according to work flow at any given time.
The cylindrical rolled steel case of the motor cover is bought in pre-painted.
It remains for Holifields to secure the above flange and another, smaller aluminium flange on the top, then secure the assembly on one side with a complicated steel hinge that is CNC turned at the Abingdon premises.
This is an example of Holifields' consignment stocking service, whereby individual components, kits of parts or assemblies such as this are manufactured and held in the stores until the customer calls them off, at which time they are delivered on a just-in-time basis and only then does the customer pay.
• H C Holifield (Oxford): contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
