Product category:
Bearings
News Release from: H4 Marine | Subject: Maritex 1810
Edited by the Engineeringtalk Editorial
Team on 28 June 2007
Underwater bearing contract signed
Maritex is a fibre re-inforced resin composite that has now proven itself in the most demanding of applications.
Maritex bearings was recently awarded the contract to supply composite bearings for use in a critical heavy lift operation, that would be carried out at sea in water depths of greater than 300m A quote from the contractors "The bearings were compact, strong, had very high load bearing qualities"
This article was originally published on Engineeringtalk on 7 Nov 2005 at 8.00am (UK)
Related stories
Rope cutter works in a similar way to lathe tool
A completely new design of rope cutting device the QuicKutter has significant advantages over all other systems, and has recently been fitted to the RNLI Tamar class of offshore lifeboats.
A rig platform weighing 680 tonnes would be lifted at sea onto supports from a barge by one crane using a double pulley fall block.
The pulleys in this block would be supported on two bearings.
The requirement that they would support the load and allow the pulleys to move freely ensured the safe and successful positioning of a platform valued at US $130m, with a total project cost of US $162m.
Any failure of the bearings to perform smoothly without distortion could have resulted in the loss of the platform.
The bearing material used was a modified Maritex 1810, this had been tested to a static load of 1250 tonnes equivalent, before production of the actual bearings went ahead.
Maritex is a fibre re-inforced resin composite that has now proven itself in the most demanding of applications.
Versions of this bearing material are suitable for dry water and oil lubrication and can be manufactured in a wide range of sizes and designs.
• H4 Marine: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page

