Product category:
Gears, brakes, couplings and engines
News Release from: Ondrives/Rino Industries | Subject: Hardened and ground linear shafting
Edited by the Engineeringtalk Editorial
Team on 07 November 2006
Hardened shafts complement linear
bearings
Ondrives offers a range of hardened and ground linear shafting for use with linear bearings.
Ondrives offers a range of hardened and ground linear shafting for use with linear bearings There is a drilled version of the hard linear shafting which can be used with open linear bearings
This article was originally published on Engineeringtalk on 18 May 2000 at 8.00am (UK)
Related stories
Linear guides get rack-and-pinion option
HPC Drives has extended its range of Drylin linear guides to include a rack-and-pinion option.
This is offered as h6 induction ground shafting in diameters from 12 to 50mm and lengths of 600 or 1200mm as standard.
Other lengths are available on request depending on availability.
Other hardened and ground linear shafting available includes h6 tolerance, steel or stainless versions in diameters from 3 to 80mm (steel only) and 3 to 30mm (stainless).
Standard lengths offered are 1000mm for diameters of 5mm upwards, with a maximum length of 7800mm on certain diameters.
Special machining is available on request as are special tolerances on length if required.
Other special shafting available includes ceramic shafting which can be specially quoted for in small diameters and lengths featuring high hardness, high temperature use and chemical resistance.
Linear bearings are most suitable for use with hardened linear shafts and are available as standard from Ondrives to order together.
Polishing down may be required in order to achieve running tolerance.
• Ondrives/Rino Industries: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
