Product category:
Bearings
News Release from: Ondrives/Rino Industries | Subject: Drawn cup needle roller bearings
Edited by the Engineeringtalk Editorial
Team on 23 January 2007
Needle roller bearings available from
stock
Drawn cup needle roller bearings are available in three types: open end bearings, inner ring only and closed end bearings.
Drawn cup needle roller bearings are just one of the few types of bearings offered as standard by Ondrives There are three types available: open end bearings, inner ring only and closed end bearings
All are made from hard steel with a steel case and steel cages, except those with bore sizes from 3 to 4mm, which have hardened steel needles.
For optimum life capacity, they are recommended for use onto hardened or toughened shafts.
Accuracy is affected by the accuracy of the housing and shaft used.
They will operate at temperatures up to 120C with continuous use.
• Ondrives/Rino Industries: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
