Product category:
Gears, brakes, couplings and engines
News Release from: Ondrives/Rino Industries | Subject: Quick release needle roller universal joints
Edited by the Engineeringtalk Editorial
Team on 02 October 2007
Universal joints suit a range of
applications
Ondrives' universal joint range includes needle roller universal joints with outside diameters from 20 to 95mm and lengths from 88 to 290mm.
Ondrives offers a range of universal joints from the couplings section of its mechanical drive components catalogue The range includes needle roller universal joints, which are available in either single or double types, with outside diameters from 20 to 95mm and lengths from 88 to 290mm
This article was originally published on Engineeringtalk on 18 May 2000 at 8.00am (UK)
Related stories
Linear guides get rack-and-pinion option
HPC Drives has extended its range of Drylin linear guides to include a rack-and-pinion option.
Smaller bores, keyways, square and hexagon bores, shorter lengths and quick release types are also available.
Other joints in the series include hardened pin types, which need to be well lubricated in operation.
They should be fitted with PVC rubber covers filled with grease.
In some applications high-speed and angle-forced oil lubrication may be needed.
Quick release needle roller universal joints have recently been added to the range.
They have a forged centre cross with hard ground ends for needle bearings.
These can also be used with protective rubber covers.
Rubber covers are made from oil resisting synthetic elasticate rubber, making them resilient to water and weather.
There is also a range of hand-operated joints, offering low cost and efficiency at low speeds.
Both steel and stainless steel models are available in single and double versions.
• Ondrives/Rino Industries: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
