Product category:
Ballscrews, Linear Guides, Jacks, Dampers
News Release from: Ondrives/Rino Industries | Subject: Rino Industries leadscrew actuators
Edited by the Engineeringtalk Editorial
Team on 23 April 2008
Leadscrew actuators offer high accuracy
The body and carriages are made from 6082 T6 aluminium, while the leadscrew is 303 stainless steel with a TFE coating.
Rino Industries has released a low-profile leadscrew actuator Screw position repeatability is 0.00127mm
A miniature, precision anti-backlash screw is used to provide lead accuracy of 0.0006mm/mm.
The actuator has an operating temperature range of 0 to 93C, a nut tensile strength of 669bar, a drag torque of 0.4Ncm and the carriage assembly weighs 0.11kg.
Three screw leads are available, between 0.50 to 10.85mm and all have a stroke of 68mm.
The body and carriages are made from 6082 T6 aluminium, the leadscrew is 303 stainless steel with a TFE coating, the anti-backlash nut is self-lubricating polyacetal with a spring and the linear slides are made from a hardened stainless steel similar to 440C with synthetic resin end plates.
The radial bearings are 440C stainless with ZZ shields.
• Ondrives/Rino Industries: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
