Product category:
Pneumatic Actuators, Motors, Accessories
News Release from: Hasolon Polymers Corp | Subject: Instant fittings
Edited by the Engineeringtalk Editorial
Team on 01 July 2003
Instant fittings handle up to three
lines
Simultaneous connection and disconnection of up to three nylon tubes can now be achieved with the help of instant fittings from Hasolon.
Simultaneous connection and disconnection of up to three nylon tubes can now be achieved with the help of instant fittings from Hasolon The new concept employs Hasolon instant-fit technology, permitting instant connection and disconnection of pneumatic tubing without the need for assembly time and giving a full flow of compressed air without restriction
This article was originally published on Engineeringtalk on 5 Aug 2003 at 8.00am (UK)
Related stories
Higher torque from AC servo actuator
The TPMA high-torque AC servo actuator is a higher-torque version of the successful TPM servo actuator from Alpha Gear Drives.
Typical applications for use of the multiconnector include pneumatic control systems, robotics, process automation, signal transfer and automatic sampling.
Other uses include hydraulic and compressed air systems.
The connector is available for tubes of 4, 6 and 8mm outside diameter.
For ease of installation, each tube is numbered, a location pin helps to avoid assembly errors and tubes are guided into position through a cap.
It can be used as a stand-alone connector or within a bulkhead.
Working pressure is up to 15bar and temperature range is between -15 and +70C.
• Hasolon Polymers Corp: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
