Product category:
Gears, brakes, couplings and engines
News Release from: Huco Dynatork | Subject: Micro-Beam coupler
Edited by the Engineeringtalk Editorial
Team on 21 November 2001
Cost-effective new one-piece shaft
coupler
For miniature precision drive applications, the new Huco Micro-Beam coupler offers an extremely cost-effective means of dealing with shaft misalignment whilst ensuring high positional accuracy.
For miniature precision drive applications, the new Huco Micro-Beam coupler offers an extremely cost-effective means of dealing with shaft misalignment whilst ensuring high positional accuracy With an overall length of only 12.7mm and diameter of 6.4mm this coupler provides all the benefits of larger versions and is therefore ideal where backlash cannot be tolerated and high torsional stiffness is essential
This article was originally published on Engineeringtalk on 22 Feb 2000 at 8.00am (UK)
Related stories
Sony coilwinding machinery uses Huco brakes
The MTL precision magnet tensioning brakes range comprises six basic models covering a variety of torques, loads, speeds and application configurations.
Available in stainless steel or aluminium, this one-piece coupler may be specified with bores up to 3mm.
It can accommodate angular misalignment up to 3deg and parallel offset up to 0.07mm.
Peak torque is 45Ncm for the stainless steel version and 40Ncm in aluminium.
Standard bore sizes are normally supplied from stock but non-standard bores can also be produced to customer order.
Huco operates an ISO9002 accredited system ensuring the best possible quality is inherent in their products and customer services. Request a free brochure from Huco Dynatork ...
(This was Engineeringtalk's Top Story on 20 November 2001).
• Huco Dynatork: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
