Product category:
Materials testing equipment
News Release from: Imada | Subject: DPZ Series
Edited by the Engineeringtalk Editorial
Team on 24 November 2003
Force gauge and test stand combine for
NDT
The DPZ Series are digital, high-performance force gauges designed to measure force up to 220lbf with an accuracy of +/-0.2% FS, +/-1LSD.
The DPZ Series are digital, high-performance force gauges designed to measure force up to 220lbf with an accuracy of +/-0.2% FS, +/-1LSD The DPZ Series features: selectable measuring units - pounds force, kilograms force or Newtons; selectable measuring modes - real time or peak; and a reversible display
This article was originally published on Engineeringtalk on 24 Nov 2003 at 8.00am (UK)
Related stories
Wrench doubles as digital torque tester
The DSW-75 digital torque tester has an integral LCD and 300-degree swivelling head for convenient torque readings up to 660lbf-in with an accuracy of +/-0.5%, +/-1LSD.
It also offers programmable high/low setpoints for go/no-go testing and a 960-record data memory for download using Digimatic or serial output.
The MX-110 Series test stands use a screw drive system and a state-of-the-art brushless motor to provide extremely smooth and powerful operation over the entire speed range.
MX-110 can operate on single or continuous cycles.
Users can combine the MX-110 test stand and DPZ force gauge to enable force control.
Force control can automatically stop testing when the force value reaches the high setpoint programmed on the DPZ force gauge, or can maintain the applied force between the high and low setpoints.
Force control is ideal for fatigue or nondestructive testing.
Each product carries a 2-year warranty.
• Imada: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
