Product category:
Connectors, Terminals, Busbars and Slip Rings
News Release from: Icore International | Subject: ATEX approved connectors
Edited by the Engineeringtalk Editorial
Team on 01 November 2004
Circular connectors are ATEX approved
Circular multipole connectors in the CB, SPDT and BPDT ranges are an ideal choice where robust, lightweight power and signal connectors are required for use in hazardous areas.
Approved for ATEX Group II Category 3 Zone 2 applications, circular multipole connectors in the popular and versatile CB, SPDT and BPDT ranges from interconnect expert Icore International, are an ideal choice where robust, lightweight power and signal connectors are required for use in hazardous areas Suitable for use with both multicore cables and open-wire assemblies, the connectors can be supplied with standard contacts rated at up to 100A at 750V
This article was originally published on Engineeringtalk on 18 Oct 2001 at 8.00am (UK)
Related stories
Plating system avoids the use of cadmium
The new TTHT plating system from Icore has been specifically developed to inhibit the corrosion of aluminium and brass components in tough aerospace, maritime and military environments
PTFE hose resistance to over 230 substances listed
Icore's lightweight and stainless-steel braided convoluted PTFE hoses are suitable for use with media,including oxygen, potable water, chemicals, fuel, hot oil, coolant and hydraulic fluid
Short contacts rated at 2A, 30V can also be fitted for control circuit interruption, and when correctly used, they allow the connectors to be disconnected safely, when there is a risk of explosive gases being present.
Both standard and short contacts feature crimp or solder connections, and are silver-plated to enhance conductivity and corrosion-resistance.
The outer body shells of the connectors are manufactured from a fortified polymer material, which is nonconductive, corrosion-resistant, and rot-proof.
ATEX-approved connectors from Icore International are available with size 18, 22, 28 and 36 shells.
All types have an IP68 protection rating, and an operating temperature range of up to 85C, making them suitable for use in even the most demanding environments.
To further enhance their versatility, all of the connectors in the range can be configured for panel mounting, or for use as in-line couplers.
Fast and easy mating is ensured by the use of a coarse multi-start acme thread on the coupling unit.
Keyway facilities are also provided to protect against the accidental cross-connection of circuits using similar connectors, and all types can be fitted with a captive screw-on cap to provide protection while they are in the unmated condition.
• Icore International: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
Search the Pro-Talk network of sites
