Product category:
Machine Building Components
News Release from: Integrated Dispensing Systems | Subject: See-Flo 387 meter/mix system
Edited by the Engineeringtalk Editorial
Team on 01 March 2001
Precisely measured shots of two-part
adhesives
See-Flo 387 meter/mix system manufactured by Sealant Equipment and Engineering, dispenses precisely measured shots and controlled beads of two-component adhesives and sealants.
See-Flo 387 meter/mix system manufactured by Sealant Equipment and Engineering, dispenses precisely measured shots and controlled beads of two-component adhesives and sealants The air-powered, bench-top system is frequently used with low-viscosity adhesives and sealants for electronic potting, encapsulation and bonding applications
This article was originally published on Engineeringtalk on 8 Mar 2001 at 8.00am (UK)
Related stories
Potting electical components - how it's done
A potting operation is smooth and predictable, allowing a single operator to produce four 80-pin power train connectors every 20 seconds
Volumetric shot sizes up to approximately 32 cc's (for a 1:1 ratio material) are attainable.
Different ratios allow different volumetric amounts to be dispensed.
The shot size may be changed by a quick, easily accessed adjustment.
Material may be dispensed either as a volumetric measured shot or as a controlled bead.
By offering precise control over the mixed material's flow rate, the 387 system has the capability to dispense a consistently sized bead of material around a part.
The 387 system uses the unique 2200-250-000 Snuf-Bak(tm) dispense valve with No-Flush* disposable static mixer.
While eliminating the need to solvent flush the mixer, the valve mixes and dispenses at the point of application, ensuring efficient mixing and placement of the material.
• Integrated Dispensing Systems: contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page

