Visit the IFM Electronic web site
Click on the advert above to visit the company web site

Product category: Proximity Sensors
News Release from: IFM Electronic | Subject: M18 compact speed monitor
Edited by the Engineeringtalk Editorial Team on 01 March 2006

Speed monitor fits tight spaces

Microprocessor-controlled evaluation system for monitoring rotating or linear movements incorporates the sensor and the speed monitoring in one housing.

The M18 compact speed monitor from IFM Electronic is a microprocessor-controlled evaluation system for monitoring rotating or linear movements The unit can be used according to group II, category 3D, zone 22 (non-conductive dusts)

The compact speed monitor incorporates the sensor and the speed monitoring in one housing.

The housing allows mounting in small machines with only little space for sensors.

It is suitable for use with a PLC.

This unit lets the user set the parameters, switch point, start-up delay and output function.

When the teach button is pressed, the current speed is measured, the switch point is calculated and stored.

The start-up delay can be set individually.

It is adjustable in the range of 0 to 15s in steps of 1s, thus avoiding any error message during the start-up of the drive.

The output function can be selected to be normally closed or normally open.

The standard speed monitor is a three-wire unit with a nominal voltage range of 10 to 36V DC.

It can be used for operating temperatures of -20 to +60C.

The maximum damping frequency is 18,000pulses/min, the setting range is 3 to 6000pulses/min.

The housing made of metal and plastic guarantees protection rating IP67 and protection class II. Request a free brochure from IFM Electronic ...

IFM Electronic: contact details and other news
Email this article to a colleague
Register for the free Engineeringtalk email newsletter
Engineeringtalk Home Page

Search the Pro-Talk network of sites

Visit the IFM Electronic web site