Product category:
Bearings
News Release from: Schaeffler (UK)
Edited by the Engineeringtalk Editorial
Team on 13 February 2007
Automotive company stays in Wales
After introducing a three-year culture change programme to its manufacturing plant in Llanelli, automotive components supplier Schaeffler (UK) has avoided transferring production to Eastern Europe.
After introducing a three-year culture change programme to its manufacturing plant in Llanelli, automotive components supplier Schaeffler (UK) has now averted the threat of production being transferred to Eastern Europe Three years ago, like many UK-based manufacturers, Schaeffler UK's plant in Llanelli, South Wales, was under extreme pressure from lower labour cost countries
This article was originally published on Engineeringtalk on 14 Aug 2008 at 8.00am (UK)
Related stories
Precision bearings keep hydraulic systems running
Hydraulic drives and pumps require precision bearings and seals that are reliable, efficient and able to withstand the most demanding operating conditions.
Overview covers full linear range
Guide presents a complete overview of linear bearings and guidance systems available from precision bearings manufacturer Schaeffler UK.
Production was about to be transferred to Eastern Europe, which would result in inevitable job losses at the Welsh plant.
However, with the help and commitment of his workforce, plant Director at Llanelli Roger Evans had other ideas.
"When it came to enthusing and motivating the employees here at the plant, the philosophy I adopted was that the rate of learning should be greater than the rate of change", explains Evans.
"Back in 2001, the management team at the plant recognised that in order to survive in the long term, new products had to be attracted into the plant".
"So we embarked on a three-year culture change programme, to try to reach our vision of becoming the production location of choice, both within the Schaeffler Group and with customers".
Further reading
Vibration sensor spots bearing damage early
FAG Detector III is used for the early detection of damage in rotating machine elements such as rolling bearings.
Monorail guidance systems explained
Guide to guidance systems and accessories includes both linear recirculating roller bearing and ball bearing guideway assemblies, as well as complete linear guidance systems.
Automatic balancing meets vibration standards
The Schaeffler Group's Autobalancer makes working more comfortable, more productive and improves the health and safety of users.
"The programme started with a management strategy workshop, which identified the vision and also determined the inherent company values that had to be adopted by all our employees in their day to-day activities, namely integrity, innovation, respect, commitment and passion".
"We then set about interviewing every member of the workforce individually to explain the plant's vision and to get the employees' feedback on this", says Evans.
"We realised from the interviews that our employees didn't possess the required skills, knowledge and expertise to achieve the vision".
"So we increased our investment in training in order to raise overall skill levels at the plant and to foster an environment of life-long learning and continuous improvement", he adds.
"However, in order to put the strategy into place, processes and new procedures were required".
"A 'single thread' concept was established, which identified the enablers (customers, suppliers, processes, employees and costs) and the targets (meaningful KPIs), at a company, departmental and team level".
Since the culture change programme was introduced in 2001, the plant has seen some formidable improvements.
Around 89% of operators have now achieved NVQ Level II in Performing Manufacturing Operations - the aim is to reach 100%.
Many operators have also requested to proceed to NVQ Level III.
And all employees at the plant have now undergone training in 5S Workplace Organisation Training.
"Employee morale is high and demand for learning is greater now than it has ever been", says Evans.
"Team working, co-operation and communication have all improved, as has the trust between management and the workforce".
A questionnaire carried out recently at the plant had a high response rate and revealed that the workforce had a very positive attitude towards learning and development.
91% said they believed it was necessary to learn new skills and 95% said it was their duty to contribute towards problem solving.
The launch of the company-wide 5S programme has also contributed to the success of the plant.
Improvements in housekeeping and workplace organisation have been made, as well as improvements in a range of key performance indicators.
First, scrap levels have been reduced from 2.92% to less than 1%; accidents have been reduced by 60%; absenteeism has dropped from 6.2% to 3.6%; and defects have been reduced by more than 90%.
Added value per employee, another key measure at the plant, has also improved dramatically.
"We've also implemented Six Sigma and Kaisen projects, which resulted in substantial cost savings of around Eur 500,000", says Evans.
"But the real difference has been the workforce, who now show a greater willingness to learn and to take responsibility for their own development".
"More than 100 employees, for example, have voluntarily enrolled on our 'Learn Direct' courses and the use of our new Learning Centre".
But not everything went smoothly and some considerable barriers had to be overcome to reach the plant's vision.
As Evans explains: "Time and resources have been a major difficulty during the programme".
"Manufacturing output has had to be maintained to satisfy our customers".
"It has been a continuous balancing act to keep the initiative on track and to maintain production".
"The support and buy in of all senior managers from the outset was critical".
"However, rather than a downturn in productivity, the benefits of continuous improvement are beginning to be realised and productivity has increased considerably".
Another difficulty was actually encouraging the workforce to learn.
"The factory is located in an area of Wales with some of the lowest levels of adult literacy, with many employees not having been in a formal learning environment since they left school and have no formal qualifications".
"We realised it may be difficult to enthuse these people to enter into learning initiatives".
"So the one-to-one interviews were very important", Evans says.
"The support of management in encouraging learning, along with the support of the local college, Coleg Sir Gar, particularly in the area of basic skills, were critical success factors".
The CBI has recognised the Llanelli plant's recent achievements by awarding the company the Human Capital Award for Education, Skills and Leadership 2006.
Schaeffler UK beat the likes of McDonalds, ARM, Baxi Heating UK and the Serco Group to win the award for its outstanding achievements in education, leadership development and skills-based initiatives.
Roger Evans received the award on behalf of the plant at the awards ceremony on 19th October this year at London's Hilton Park Lane. Request free introductory details about products from Schaeffler (UK) ...
• Schaeffler (UK): contact details and other news
• Email this article to a colleague
• Register for the free Engineeringtalk email newsletter
• Engineeringtalk Home Page
